MAXXIS tires Minion DHF 29 x 2.50 WT 3C MaxxGrip TR Downhill
Number one in the world...
With the Minion DHF, proven elements such as slanted lugs for low rolling resistance and smooth running were combined with cut lugs for more grip.
Which makes it the perfect all-rounder for enduro and freeride use.
Due to the excellent directional stability and the cornering stability, it offers a clearly defined limit area, so that it is a recommendation for everyone.
Wide Trail Casing (WT)
This special carcass construction optimizes the tread layout and tire shape on today's wider rims. Traditional tires are developed for narrow rims and get a too square shape on wide rims and thus a less than optimal performance.
WT tires are optimized for an internal rim width of 35 mm, but work excellently on all rims with an internal dimension between 30 and 40 mm.
Tubeless Ready (TR)
tube tires have many advantages: You can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no inner tube , the risk of punctures is also reduced. MAXXIS TR tires are better prepared for mounting with sealant than other "tubeless ready" tires. The bead of our TR tires is completely covered with a rubber layer like a real UST tubeless tube . As a result, tube installation is successful for all rims with standard dimensions the first time you pump it up and with little liquid.
"Normal" MAXXIS MTB tires can also be mounted tubeless with sealant like tires from other manufacturers, as the carcass fabric is very dense.
However, only the new MAXXIS TR models are officially approved for tubeless assembly and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.
Note: We strongly advise against the use of sealant containing ammonia. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after just a few months.
Dual ply casing
Two gathered layers of fabric are wrapped around bead cores. This results in an extremely stable and safe carcass, which is particularly important when going downhill. There are four layers on the side walls and even six layers on the treads.
Our well-known 3C downhill compound, which many of the best downhillers have trusted for years, is now called 3C MaxxGrip. 3C MaxxGrip offers the ultimate grip and cushioning properties for unrivaled downhill traction.
Tire type: folding tires
Area of intended use : Enduro, All Mountain, Freeride
Size (inches): 29 x 2.50
Size (ETRTO): 63 - 622
Design: dual ply casing, TR
Rubber compound: 3C MaxxGrip
Carcass: 60 TPI x 2DW
E-bike compatibility: yes, up to 25 km/h
Profile: optimized for the front wheel
Air Pressure: 35 - 50 PSI | 2.5 - 3.4 bars
Recommended inner rim width: optimal for 35 mm, 30 - 40 mm width also possible
Maximum load: not specified
Note: The weights of different tires can vary due to production.
Scope of delivery: 1x MAXXIS tire Minion DHF 29 x 2.50 WT 3C MaxxGrip TR Downhill