KOGEL BEARINGS Sealing Kit 6806 | Road seals BB30 and PF30 bearings
The people at Kogel Bearings believe that high quality ceramic bearings are the measure of things for ball bearings in bicycles.
Silicon nitride has a number of material properties that make it almost perfect for bicycle storage.
The material is extremely hard, wear resistant, can be formed into perfectly round balls with minimal tolerances and can be polished smoother than any metal. In addition, the material does not rust or corrode in any other way.
The bearing rings are made of hardened steel and polished. This is necessary to create a perfect, smooth running surface for the ceramic balls.
Kogel Bearings offers two different types of gaskets for different applications: Road Seals, a minimal contact gasket designed to run as lightly as possible.
The Cross Seals, on the other hand, are designed to provide extra protection against external weather: dust, water and mud. It is great for CX, MTB or road bike use when it comes to maximum life.
Kogel Bearings is aware that ceramic bearings have a bad reputation for durability. This is usually due to the suboptimal quality of the stock being sold as a high.
A bearing needs to be balanced and designed: the hardness of the balls requires to be combined with equally smooth and hard bearing tracks. The bearing cage, seals and greases must be coordinated to work perfectly.
If one of the components does not fit optimally, it reduces the performance of the entire bearing. The result is increased resistance, shortened life or even total failure of the bearing.
If something breaks down in the first year, Kogel will repair or replace the product without asking many questions.
After the first year, a service must be provided. If the bearing is serviced by a qualified mechanic, ie a cleaning, relubrication and replacement of the seals,
the warranty is extended for another year.
The sealing kit is required if you subject your bottom bracket to regular (yearly) maintenance. It is suitable for the 6806 bearings which Kogel uses for inner bearings for BB30 and PF30 frame standard. Only suitable if the bearing for cranks with 30 mm shaft is installed. This set consists of four spare seals to maintain a complete bottom bracket.
Sealing: Road Seals
intended use : Road
Material bearing shell: aluminum
Material bearing: ceramic hybrid
Storage Type: 6806
Crank shaft diameter: 30 mm
Compatibility Crank: BB30, PF30
Stock: Kogel Bearings
Weight: about 10g
Scope of supply: 1x KOGEL BEARINGS Seal Kit 6806 (4 x spare seal) | Road seals BB30 and PF30 bearings
Bottom bracket overview Install Bottom Brackets Like a Boss
Installation Manual Service Manual