HOPE Rear Wheel 29" Fortus 30W Single Cavity | Pro 5 6-Hole | 12x148 mm Boost | orange
Install, drive and just forget. Hope's components have always been synonymous with durability and robustness. The latest generation of their wheels is in no way inferior. You can really let it rip with them and even occasional driving mistakes will be forgiven.
The Fortus rims also contribute to the resilience of the single cavity variant. They can even cope with tough enduro use with ease, but weigh significantly less than the multi-chamber version. Made of high-quality 6061 T6 aluminum, they can accommodate tires up to 2.8" wide with their enormous inner width of 30 mm. This provides additional grip and comfort. The welded ends ensure a perfect look and increased stability. The reinforced rim flange is stuck even more powerful punctures without damage.And of course the Fortus can be converted for tubeless use.A set of rim tape and valve is already included in the scope of delivery.
The Pro 5 hubs from the English cult manufacturer from Barnoldswick rotate in the center. The experience of 30 years of designing and manufacturing high-quality drive elements flowed into their development with the aim of improving proven technology in order to meet the demands of current and future bicycle technology.
The design of the rear wheel hub differs significantly from the previous model. Their enlarged body generates more rigidity without increasing the weight. This is particularly noticeable in a much more direct driving behavior. At the same time, the diameter of the spoke flange increased. This simplifies the construction of very stable wheels.
The highlight of the rear wheel hub is the new 6-pawl freewheel system in offset design. This is characterized by the fact that three of the six pawls are always engaged when driving in order to distribute the load evenly. In addition, the freewheel toothing has been increased from 44 (Pro 4) to 54 teeth, resulting in a total of 108 locking points and a low idle travel of just 3.33°. In addition, some material has been removed from the springs of the pawls, which slightly reduces the spring force and reduces their resistance. With the Pro 5, Hope creates the right balance between smooth running and durability.
Typical for Hope is the perfect workmanship. The hub can withstand negative external influences for a long time, which is also thanks to the high-quality anodizing and the very well sealed stainless steel industrial bearings. Should the ravages of time gnaw at it at some point, it can be disassembled and serviced without much effort. In addition, conversion to a different hub standard is possible without any problems.
The connection between rim and hub is made by Sapim Race spokes. These classic round spokes have a butted middle section and provide more damping than straight spokes throughout. In addition, high peak loads can be better digested. The Race spokes enable very stiff and stable wheels for practically every intended use .
Technical specifications:
intended use : trail, all-mountain, enduro
Wheel size: 29" (ETRTO: 30-622)
Rim Type: Clincher (clincher and folding)
Brake type: only for disc brake
Brake disc mount: 6-hole
Material: aluminum 6061 T6, steel
Inner Width: 30mm
External width: 35.2mm
Rim Height: 20mm
Number of holes: 32 holes
axle type : 12x148 mm Boost
bearing : Hub body: 2x stainless steel cartridge bearings (17x30x7 mm), freewheel body: cartridge bearings depending on the version
Freehub Compatibility: 9-, 10-, 11-speed Shimano | SRAM MTB, 11-, 12-speed SRAM XD or 12-speed Shimano Micro Spline
Freewheel type: 6 pawls, 54 detents (offset design 108 detent points, maximum 3.33° free travel)
Spokes: Sapim Race J-Bend with silver brass nipples
tubeless capable: yes
recommended tire width: 2.4” - 2.8”
maximum system weight: not specified (driver, bike, clothing and possibly luggage)
Color rim: black matt
Color hub: orange
Weight according to the manufacturer: kA
Weight weighed: 1147g (SRAM XD, without rim tape and valve)
Scope of delivery:
1x rear wheel
1x tubeless rim tape
1x tubeless valve
A notice:
Possibly the rear wheel is shown with a black hub. It is of course delivered with an orange one.
HOPE Front Wheel 29" Fortus 30W Single Cavity | Pro 5 6-Hole | 15x110 mm Boost | orangein about 4 - 6 weeks