HAYES Dominion T2 disc brake | single brake | black
The same popular performance of the Dominion A2 with significantly reduced weight - this is what the limited edition Dominion T2 from Hayes aims to deliver. Equipped with a carbon lever designed and produced in-house by Reynolds, titanium hardware, a composite reservoir cover and Brake Pads with aluminum backing plates. This results in a weight of 254 g, making the T2 around 50 g lighter than the Dominion A2. Despite this reduction in weight, the T2 should be in no way inferior to the A2 in terms of braking power and modulation. As requested by customers, the lighter version should also provide power thanks to an additional sliding ring on the piston of the master cylinder and the sealed ball bearings at the pivot point of the lever and still enable predictable and therefore always controlled braking.
Features:
- New development with two-piston technology
- Carbon lever with ball bearings for better hand feel
- Tool-free free travel adjustment
- Aluminum pistons for optimum heat management
- DOT 5.1 brake fluid
- Very rigid brake calliper
- Two bleed ports for the safest possible bleeding
- Crosshair alignment aid on the brake calliper
- Semi-metallic with aluminum carrier plate
Technical data:
Area of application: All-Mountain, Enduro, Downhill, E-MTB
Brake caliper material: Aluminum
Brake lever material: Carbon
Housing material: Aluminum
Material reservoir cap: Composite material
Material mounting bolts: Titanium
Piston: 2
Brake mounting: Postmount
Recommended brake disk: without (Hayes D-Series recommended)
Brake fluid: Brake fluid DOT 5.1
Brake hose: plastic reinforced with Kevlar
Brake Pad: semi-metallic
Brake lever design: 2-finger
Reach adjustment: yes
Pressure point adjustment: yes
Mounting: left or right (flip-flop)
Clamp: split
Cable length: 1000 mm (VR) or 1800 mm (HR)
Color: black, white logo
Weight according to manufacturer: 254g
Weight self-weighed: 250g (without bolts), 272g (without bolts)
Scope of delivery:
1x HAYES disc brake Dominion T2 | single brake front or rear, WITHOUT brake disk and adapter!
1 pair of semi-metallic Brake Pads
1x support sleeve, olive and union nut
