FOX suspension fork 2025 29" Float 32 SC P-S 100 3-Pos GRIP Performance Boost matte black Kabolt SL 15x110 mm tapered 44 mm offset
Next Lightweight Level.
FOX presents a completely new outer skin for its 32 Step Cast fork to mark the company's 50th anniversary. The revised casting of the FOX 32 SC, with the fork crown moved to the rear, brings an increase in stiffness of a whopping 40 % compared to the previous model. FOX also devoted itself to the fork crown, changed the material (7000 aluminum) and dispensed with the typical offset. In order to still generate the proven 44 mm offset, the steerer tube was angled in the crown. This also reduces the weight without compromising on stability. In combination with the new, lighter, bolt-on Kabolt SL thru-axle, this results in a weight saving of almost 50g and a total weight of less than 1350g. This makes it one of the lightest XC suspension forks on the market.
32 SC CHASSIS DESIGN
The striking shape of the dip tube design is not just for looks. FOX uses a narrow design for the Step-Cast (SC) fork chassis of the 32 series to save weight. The step in the lower fork section also creates space for the spokes and the brake rotor. The 32 mm stanchions of the 32 SC have generously overlapping bushings and ensure precise transmission of the steering impulses. The FOX 32 SC therefore scores with excellent handling characteristics.
3-POS GRIP damper
The GRIP damper cartridge, inspired by motocross technology, works with a spring-loaded, independently operating, floating piston. The GRIP technology allows the excess damping oil to flow through ports at the top of the damper, which guarantees even damping and increases durability. The forks of the Performance series provide the Open, Medium and Firm modes as well as an additional fine adjustment option between these three basic settings. The rider now only has to worry about adjusting the spring preload and rebound.
EVOL
The enlarged negative air chamber improves the response of the fork. This increases comfort because the breakaway torque has been reduced. In addition, a more linear spring characteristic curve offers better performance, especially in the middle spring travel ranges.
FLOAT AIR SPRING
The FLOAT air spring system reduces the breakaway torque and thus offers a highly sensitive fork and full comfort even with small bumps, for every type of rider and at different air pressures. Similar to the FLOAT suspension struts, the FLOAT suspension system is characterized by a positive and a negative air chamber, which automatically balance each other out when riding. Every rider thus enjoys the benefits of the correct, precisely balanced air pressure in both air chambers. The progression of the spring characteristic can be adjusted with our air volume spacers - allowing every rider to precisely set the characteristics of the air spring.
LOWER LEG CHANNELS
When a fork compresses, the air in the lower sections of the lower leg channels is compressed at the same time. The further the fork compresses, the more the pressure increases. This effect means that the fork responds harder and may not be able to use the full suspension travel.
The overflow channels help to solve this problem by directing the compressed air from the lower part of the fork tubes upwards, thus reducing the unintended increase in pressure. A further advantage of these channels is that the lubricating oil in the lower section of the dip tubes circulates upwards during the spring process and continuously lubricates the foam rings and the sliding bushes.
AIR VOLUME SPACERS
The FLOAT air spring on FOX forks and shocks can be fine-tuned using volume spacers to make the suspension elements more progressive or less progressive. This allows the rider to fine-tune the suspension exactly to their needs.
Technical data:
Area of application: Cross country, marathon
E-bike ready: no
Wheel size: 29"
Material fork crown/stem: aluminum/aluminum
Material stanchion tubes: Aluminium, black anodized
Stanchion tube diameter: 32 mm
Material down tubes: Magnesium
Axle standard: 15x110 mm Boost Kabolt SL thru axle
Steerer tube: 1.5" to 1 1/8" tapered
Steerer tube length: 265 mm
Suspension travel: 100 mm
Suspension system: Float Air, air
Adjustment of the spring characteristic: yes, via volume spacer
Damping: 3-Pos GRIP, closed cartridge
Adjustment options: Lowspeed compression (LSC): 3 clicks - open, medium, firm | Lowspeed rebound (LSR): 10 clicks
Lockout: on the fork crown
Installation height: 503.7 mm
Brake mount: PM6, post mount (160 mm)
Max. permissible brake rotor size: 180 mm
Max. tire diameter: 759 mm
Max. tire width: 2.4” or min. 8.5 mm tire clearance to fork bridge
Offset: 44 mm
Color: black matt, silver-grey decals
Weight according to manufacturer: from 1276g (29", F-S, 100, Grip SL, Kabolt SL, 165mm stem length)
Weight self-weighed: - g incl. thru axle
Scope of delivery:
1x FOX suspension fork 2025 29" Float 32 SC P-S 100 3-Pos GRIP Performance Boost matte black Kabolt SL 15x110 mm tapered 44 mm offset
1x FOX 15x110 mm Kabolt SL thru axle Boost
3x FOX Air Volume Spacers
1x Ahead claw
1x user manual