FOX seatpost Transfer P-SE Performance Elite internal | 2025 | 120 mm
All good things come in threes.
FOX presents the third evolutionary stage of its adjustable seatpost. Here is the new TRANSFER.
FOX presented the first generation of the TRANSFER in 2016, and since then the terms Vario seatpost, dropper post etc. have become an integral part of the mountain bike industry.
The gain in riding fun and, above all, riding safety has been significantly increased by this component. While the first dropper posts of their kind were usually still routed externally and adjustment ranges of 150 mm were considered considerable,
the cables have long since been neatly tucked away inside the frame and adjustment ranges beyond 200 mm are now up to date. So what else is possible?
FOX shows it!
Up to 240 mm travel is now available. Versions for 34.9 mm seat tubes have been developed for the first time and thanks to small plastic spacers, the stroke can be successively reduced by up to 25 mm in 5 mm increments. This results in a range from 95 mm to 240 mm, depending on the version.
For this 120 mm version, this results in the following values: 95 | 100 | 105 | 110 | 115 | 120 mm
As each seatpost grows in length due to the increased stroke, the other elements must be kept flat and the maximum insertion depth and the minimum insertion depth required must also be reduced. A real highlight is the significant increase in service-friendliness. You can now easily adjust the air pressure and thus the extension speed of the TRANSFER by simply inflating the auto valve under the saddle clamp with your fork pump. The recommended service interval has also been increased from 125 to a remarkable 300 operating hours and can now even be carried out without special tools.
What remains is its reliability and the smooth way it does its job. Even though the saddle clamp has been revised, the same low overall height remains, which was already used in the second generation.
Technical data:
Application: MTB, Tour, Gravel
Material: Aluminum
Bolt material: Steel
Operation: Remote lever with internal control
Diameter: 30.9 | 31.6 | 34.9 mm
Length (A): 346 mm (when extended, without activation) | 374 mm (when extended, incl. activation)
Adjustment range (B): 120 mm (can be reduced to 95 | 100 | 105 | 110 | 115 mm)
Minimum insertion depth (C): 128 mm (incl. control)
min. possible usable height (D): 156 mm
Max. possible usable height (E): 246 mm (upper edge of saddle clamp to lower edge of saddle frame)
Offset: 0 mm
Seat post compatibility: round (7x7 mm) and oval (7x9 mm)
Functionality: pneumatic/hydraulic
Feature: Black Ano coating, air pressure adjustment (275 - 325 psi)
max. rider weight: n.a.
Color: black matt, black glossy (dip tube)
Weight according to manufacturer: 475g (30.9 x 120 mm)
Weight self-weighed: - g (30.9 x 120 mm)
Scope of delivery: 1x FOX seatpost Transfer P-SE Performance Elite internal | 2025 | 120 mm, without remote lever
NOTE: The remote lever required for operation must be ordered separately; you can choose between different brands and versions for 1x or 2x, 3x drivetrains.
This seatpost has internal control. This means that the cable must be routed through the frame (seat tube). Please make sure that your frame is designed for the use of seat posts with internal actuation!
FOX Remote Lever 2020 for 1-, 2- & 3-speed drivetrain Seatpost Transferavailable from stock
