FIZIK Saddle Vento Arione R1 Adaptive Carbon 135 mm | black
The Arione is designed for optimized power transmission with a high degree of freedom of movement for the rider. The flat saddle geometry stabilizes the pelvic position, while the extended saddle nose enables effective power support under high loads - for example in headwinds or on climbs. The lateral areas with WingFlex technology are elastic and adapt to the movement of the thighs, ensuring unrestricted pedaling movement even at high cadences and longer load intervals. Reduced, finely tuned padding enables direct feedback from the bike without significantly compromising long-distance comfort. The 3D-printed padding provides more support and stability during long races in a leaned-forward, aerodynamic position.
3D Printing Adaptive Technology
Thanks to the innovative 3D printing technology, Fizik was able to significantly improve the properties of the saddle, which would have been impossible with conventional materials and techniques. The DLS (Digital Light Synthesis) manufacturing process, which uses UV light to cure a printed polymer/resin/plastic mixture, allows four different damping zones to be generated with pinpoint accuracy. This significantly increases comfort in exposed areas while reducing weight and optimizing freedom of movement. Riders who like to change their sitting position also experience an unprecedented increase in performance. The open honeycomb structure also enables a very high level of breathability and thus avoids the risk of painful chafing, especially in summer.
Naturally, the saddle has been extensively tested by ambitious athletes and professionals in everyday use and races to ensure that only a fully developed product is launched on the market. In addition to all the technical finesse, emphasis was also placed on durability and robustness. In normal use, there is no difference to conventional saddles. All you have to do to clean it is run some water through it.
Technical data
Area of use: Road bike
Saddle shell: Carbon reinforced nylon shell
Frame: Carbon
Saddle cover: open 3D printed foam structure
Length: 300 mm
Width: 135 mm
Height: n.a.
Strut diameter: oval 7 x 9 mm
saddle rails adjustment range: 57 mm
Maximum rider weight: n/a
Tightening torque: maximum 12 Nm for carbon seatposts
Finish: 3D foam structure
Color: black
Weight according to manufacturer: 190g
Weight self-weighed: -
Scope of delivery: 1x Vento Arione R1 Adaptive Carbon saddle
FIZIK handlebar tape BAR:TAPE Vento Microtex Tacky 2,0 mm | blackavailable from stock
