Description
EXTRALITE freewheel body kit for Hyper3 hub 36T | SRAM XD
Extralite hubs have a reputation for being durable and indestructible. Nevertheless, wear and tear or defects can of course occur after years of hard use. And so that you don't have to replace the entire component at once, you can get a relatively inexpensive replacement here.
With this kit you not only replace the freewheel body, the toothed disc is also supplied at the same time. As a result, the entire propulsion unit is in like-new condition again and you can fully concentrate on the trail again.
This toothed disc freewheel has 36 detents. Although this increases the free travel slightly, the contact surface of the individual teeth is larger and therefore more resistant. It is therefore also approved for e-bikes.
Enduro stainless steel ball bearings
Enduro Bearings stainless steel bearings are an interesting alternative for anyone who wants to ride in any weather. The 440C stainless steel used is a bit softer than steel containing chromium, but is significantly more durable due to its very good corrosion resistance when exposed to constant moisture or dirt. The seals used and the CRC Marine Grease prevent the ingress of water and dirt.
Technical specifications:
Material: aluminum
Compatibility Cassettes: 11-, 12-speed SRAM XD
Compatibility hubs: Extralite HyperBoost3 R, Extralite Hyper3, Extralite HyperSmart3 R, NOT suitable for versions 1 and 2
Freewheel type: 2 toothed discs, 36 detents
Bearing: 2x industrial bearing stainless steel (ABI Enduro 440C, 2x 6803-2RS)
Colour: gold, hard-anodized
Weight according to the manufacturer: 37g
Weight weighed: 39g
Scope of delivery:
1x EXTRALITE freewheel body for Hyper3 hub 36T | SRAM XD
1x toothed disc (floating ring)
3x pressure springs
1x 5cc special grease Alugrease Super1
