ENVE rim 28" road bike SES 6.7 Rear Disc 67 mm | 24 holes
If speed is your top priority, then the ENVE SES 6.7 rear wheel rim will be your partner.It is the ultimate basis for a stable wheelset that offers the best aerodynamics. The high flank ensures that the wind slides away and suppresses braking turbulence. At the same time, the special cross-section prevents lateral gusts from having a negative effect on tracking stability, while the large inner width means that even large-volume tires can find a secure hold and you have more comfort and grip.
The ENVE engineers opted for the hookless design, which enables perfect tubeless compatibility. Mounting and demounting the tire is made much easier. A permanent seal is also guaranteed. In addition, the stability at this neuralgic point is increased, making it more resistant to punctures. Despite the high sidewall, the weight is surprisingly low, thanks to a modified lamination compared to the previous model.
This rim is intended for the rear wheel. Together with the optionally available SES 6.7 Front 60 mm rim, they make an unbeatable pair. According to the manufacturer, they should only be ridden tubeless.
ENVE products are developed in the USA and manufactured to the highest quality standards at the company's headquarters in Utah. The developers have years of experience with the use of carbon in the field of cycling and know what requirements a top product like these carbon rims must meet. At ENVE, every effort is made to utilize the advantages of carbon and eliminate its disadvantages. Stiff and extremely light rims have been developed in which all fibers can run without interruption, which corresponds to the best possible utilization of the material thicknesses. This principle has been perfected in the spoke holes, where continuous fiber strands form the receptacle for the spoke nipples. Aluminum inserts, which are common in other carbon rims, can therefore be dispensed with during production. This reduces the weight and at the same time allows significantly higher spoke tensions, which in turn allow the construction of stiffer wheels.
All rims come with an ENVE factory warranty of 5 years and lifetime ENVE Incidental Damage Protection. We recommend registering the product within 60 days of purchase to be eligible for warranty and accidental damage protection program. Register here.
Note: The ENVE SES 6.7 are only compatible with tubeless and tubeless-ready tires that are also approved for hookless rim profiles. You can find a selection of tire models tested and recommended by ENVE here. If a tire you want to use is not listed, this does not mean that it is incompatible. Rather, it has not yet been tested by ENVE.
Technical data:
Area of use: Road bike, triathlon, time trial
Material: Carbon
Rim type: Clincher (clincher and folding tires)
Brake type: Disc brake
ETRTO: 622x23
ERD: 525 mm
Inner width: 23 mm
Outer width: 29 mm
Rim height: 67 mm
Offset: 0 mm (symmetrical)
Number of holes: 24 holes
tubeless compatible: yes
ASTM classification: n/a
recommended tire width: 27 - 45 mm (aerodynamically optimized for 28 mm)
maximum tire pressure: 4.8 bar / 69 PSI (at 113 kg rider weight and tubeless setup)
maximum system weight: n.a. (rider, bike, clothing and possibly luggage)
maximum spoke tension: n/a
Features: aerodynamically optimized rim profile, recommended for rear wheel
valve hole: 6 mm (SV)
Finish: matt
Color: black
Weight according to manufacturer: 449g
Weight self-weighed: -
Scope of delivery:
1x ENVE rim 28" road bike SES 6.7 Rear Disc 67 mm | 24 holes
1x tubeless set incl. valves and rim tape
