ENDURO BEARINGS bottom bracket MAXHit BSA29 for SRAM DUB crankshafts
Enduro Bearings has been a staple in the bike market for years. As a supplier, the ball bearings are used by a large number of manufacturers. The manufacturer has used this many years of experience with crank bearings and their production in the bicycle industry to bring their own components onto the market. The bottom bracket was rethought during the development of MAXHit.
The bottom brackets are made entirely of stainless steel. The reason for this lies in the patented technology.
Enduro Bearings also uses the bearing shell as an outer bearing ring, eliminating the need for a pressed-in bottom bracket. This means that bearing balls that are 8 times larger can be used. At the same time, the contact surface of the balls with the bearing rings has been increased. The results of extensive tests show a doubling of the maximum load capacity, which is reflected in a significantly longer service life and a long-lasting smooth running of the bearings. At the same time, the weight can be kept relatively low. The bottom bracket is completed with the established double-lip sealing rings and the special high-performance grease.
Nothing stands in the way of carefree use under any conditions and purposes.
Note: The bearings are supplied without a center sleeve. During assembly, make sure that internally routed cables do not touch the crankshaft.
Technical specifications:
intended use : Road, Gravel, MTB
Material bearing shell: 440C stainless steel
Material bearing: stainless steel
Bottom Bracket Type: BSA
Bottom Bracket Shell Width: 68mm to 73mm
Bottom bracket shell Ø: 34.8 mm
Crank shaft diameter: 28.99mm
Compatibility crank: SRAM DUB
Bearings: Enduro Bearings industrial ball bearings
Tool holder: ring spanner with 12 cam mount
Silver
Weight according to the manufacturer: kA
Weight weighed: 116g
Scope of delivery:
1x ENDURO BEARINGS bottom bracket MAXHit BSA
2x dust cap
2x spacers 0.5mm
2x spacers 1mm
2x replacement sealing washer