ENDURO BEARINGS ball bearing stainless steel | 619026902 LLU MAX | 15 x 28 x 7 mm
For everyone who wants to ride in any weather, the Enduro Bearings stainless steel bearings are an interesting alternative.
The 440C stainless steel used is somewhat softer than steel containing chromium, but thanks to its very good corrosion resistance when exposed to constant moisture or perspiration, it is significantly more durable. The LLB seals used and the CRC Marine Grease also prevent water and dirt from penetrating the bearing.
LLU seal
Type of seal with double lip with stronger contact, running in a groove in the sense of a labyrinth seal
MAX warehouse
MAX bearings do not rotate as easily as conventional ball bearings and are particularly suitable for rear triangle swivel joints and problem areas in which there is increased wear.
The most important features:
- 440C stainless steel bearings
- LLB seal on both sides (labyrinth seal)
- Reduced risk of corrosion
- CRC Marine Grease
Technical specifications:
Material: 440C stainless steel
Bearing type: deep groove ball bearing 61902/6902
Dimensions AØxIØxB: 15x28x7 mm
Seal: LLU - double-sided seal
Version: corrosion-resistant
Silver
Weight according to the manufacturer: -
Weight weighed: 16.1g
Scope of delivery: 1x ENDURO BEARINGS ball bearing stainless steel | 61902/6902 LLB | 15 x 28 x 7 mm
Note: When pressing in ball bearings, make sure that the bearing is always pressed in via the outer ring, which is also the seat of the bearing.
Example hub: The hub body bearings are pressed in there over the outer ring. The bearing may therefore only be pressed in via the outer ring. Never over the inner ring.