ENDURO BEARINGS press-fit adapter outer for ball bearing 6805 / 25 x 37 mm
A defective ball bearing is no reason to replace the entire component. They can usually be replaced. However, high-quality tools should be used for correct installation. With the press-fit adapters from Enduro Bearings, their ball bearings can be inserted perfectly and the respective component is fully functional again.
Bearings that are already fitted on an axle or shaft can be installed using the press-fit adapter. Ideally, this is used with the Enduro Bearings BRT-005 press-fit tool. However, it can also be used on other spindles as long as their diameter does not exceed 8 mm.
Technical data:
Application: Press-fitting of industrial deep groove ball bearings on bottom brackets
Material: Aluminum
Compatibility press-in tool: max. 8 mm spindle diameter
Bearing compatibility (Ø inner x Ø outer): 25 x 37 mm
Color: grey
Weight according to manufacturer: n.a.
Weight self-weighed: 43g
Scope of delivery: 1x ENDURO BEARINGS press-fit adapter outer for ball bearing 6805 / 25 x 37 mm