ENDURO BEARINGS Press-fit adapter inside for ball bearing 6804 / 20 x 32 mm
A defective ball bearing is no reason to replace the entire component. They can usually be replaced. However, high-quality tools should be used for correct installation. With the press-fit adapters from Enduro Bearings, their ball bearings can be inserted perfectly and the respective component is fully functional again.
The press-fit adapter can be used to install bearings without an axle or shaft. Ideally, this is used with the Enduro Bearings BRT-005 press-fit tool. However, it can also be used on other spindles as long as their diameter does not exceed 8 mm.
Technical data:
Area of application: Pressing in industrial deep groove ball bearings on bicycle hubs
Material: Aluminum
Compatibility press-in tool: max. 8 mm spindle diameter
Bearing compatibility (Ø inner x Ø outer): 20 x 32 mm
Color: grey
Weight according to manufacturer: n.a.
Weight self-weighed: 17g
Scope of delivery: 1x ENDURO BEARINGS press-fit adapter inside for ball bearing 6804 / 20 x 32 mm