DT SWISS rear hub 350 Hybrid Disc 6-hole for 12x148 mm BOOST thru axle | Freewheel Shimano | SRAM
Hubs from DT Swiss enjoy the reputation of being almost indestructible. And not without reason. Thanks to high-quality industrial bearings made of stainless steel and effective seals, DT Swiss hubs are in fact significantly more resistant than most competitors on the market. Just unpack, install in the bike and forget. The 350 hubs are also extremely user-friendly, so no clearance has to be set and the maintenance intervals are needed, if at all, only at long intervals. Should service be necessary after tens of thousands of kilometers, thanks to the DT Swiss plug-in system, the hubs can be disassembled and maintained within a few minutes without special tools.
The hybrid version of the 350 front hub has been specially developed for use on e-bikes. For expedition bikes and for those who want a nearly indestructible wheelset, the hybrid hubs are also the best choice. Compared to the standard version, they have an oversized housing, a heavy-duty axle and extra-reinforced spoke mounts. Oversized bearings additionally ensure high robustness and durability. The proven DT-Swiss toothed disc freewheel is also made of hardened steel on the hybrid hub and has been extended to 24 teeth for a more direct response. Through these adjustments, the larger torques of e-bike drives can be absorbed by the hub. Compared to the 240s hybrid hub, the 350 was dispensed with in favor of an extremely good price-performance ratio, some weight-optimized components.
intended use : E-bike, expedition, All Mountain, Enduro
Material: aluminum, steel
bearing : 2x oversized industrial bearings
Seal: labyrinth rubber seals
Spoke type: J-bend spokes
Spoke tension: 1200N
Freewheel: Shimano MTB 9-, 10-, 11-speed | Sram 9-, 10-speed
Freewheel Type: Pulley Freewheel
Freewheeling: every 15 ° (24x per revolution)
axle type : 12x148 mm BOOST floating axle
Number of holes: 32 or 36 holes
Brake disc holder: IS 2000 6-hole
Color: black with white decals
Weight: not specified by the manufacturer
A detailed instruction manual can be found here .
Scope of supply: 1x DT SWISS 350 Hybrid Disc rear hub 6-hole for 12x148 mm BOOST thru axle | Freewheel Shimano | SRAM