CERAMICSPEED pulley wheels coated aluminum | 15 & 19 teeth for OSPW system | blue
The derailleur wheels from the Danish company CeramicSpeed represent the absolute high-end solution for all racers who place the highest value on the lowest friction with the best power transmission.
These wheels and especially their bearings have to compensate for a lot of friction. Depending on the translation, these rotate 4-5 times faster than the crank and thus benefit in particular from low-friction and durable bearing . Thanks to their outstanding smooth running, they eliminate the chain being pulled over the rear derailleur rollers.
Compared to the already high-quality standard bearings from CeramicSpeed, the "coated" version has a wafer-thin protective layer applied to the bearing rings. As a result, the latter become even harder, have a life cycle that is 60% longer and have even lower rolling resistance.
CeramicSpeed only uses the best materials and the latest technologies in production in order to always achieve the highest possible quality. All products are handmade in Denmark.
No hydraulic presses are used during assembly. Manual assembly eliminates manufacturing tolerances and always guarantees a 100% fit. So that you really only use the best on your bike!
The wheels are suitable for the following OSPW systems
- SRAM Red/Force AXS
- SRAM Rival AXS
NOTE: A Ceramicspeed OSPW rear derailleur cage is required to mount the wheels!
Area of intended use : Ceramicspeed OSPW system
Material: aluminum, ceramic grade 3
Compatibility: OSPW system, see above
Number of teeth: 15 above, 19 below
Bearing: Type 607 R17 Coated
Weight according to the manufacturer: kA
Weight weighed: 31g
Scope of delivery:
1 set of CERAMICSPEED derailleur rollers coated aluminum | 15 & 19 teeth for OSPW system | blue
1x oil, 15 ml
1x sticker sheet