CERAMICSPEED pulley wheels aluminum | 13 & 19 teeth for OSPW system | blue
The derailleur wheels from the Danish company CeramicSpeed represent the absolute high-end solution for all racers who place the highest value on the lowest friction with the best power transmission.
These wheels and especially their bearings have to compensate for a lot of friction. Depending on the translation, these rotate 4-5 times faster than the crank and thus benefit in particular from low-friction and durable bearing . Thanks to their outstanding smooth running, they eliminate the chain being pulled over the derailleur rollers.
CeramicSpeed only uses the best materials and the latest technologies in production in order to always achieve the highest possible quality. All products are handmade in Denmark.
No hydraulic presses are used during assembly. Manual assembly eliminates manufacturing tolerances and always guarantees a 100% fit. So that you really only use the best on your bike!
The wheels are suitable for the following OSPW systems
- Shimano 9200/8100
- Shimano 9100/9150 and 8000 SS/8050 SS
- Shimano GRX810/815 and RX800/805
- Campagnolo 11-speed EPS and mechanical
- Campagnolo 12-speed EPS
NOTE: A Ceramicspeed OSPW rear derailleur cage is required to mount the wheels!
Area of intended use : Ceramicspeed OSPW system
Material: aluminum, ceramic grade 3
Compatibility: OSPW system, see above
Number of teeth: 13 above, 19 below
Bearing: Type S 607 R17
Weight according to the manufacturer: kA
Weight weighed: 29g
Scope of delivery:
1 set CERAMICSPEED rear derailleur rollers aluminum | 13 & 19 teeth for OSPW system | blue
1x oil, 15 ml
1x sticker sheet