Description
CERAMICSPEED OSPW Rear Derailleur Cage System Coated | SRAM Road AXS
CeramicSpeed's Oversized Pulley Wheel System (OSPW) is the logical consequence of minimizing friction. Due to the large derailleur pulleys with 15 teeth at the top and 19 teeth at the bottom, the wrap radii of the chain are significantly reduced, which is noticeable in the lower friction. In addition, the larger rear derailleur rollers offer a longer service life than other commercially available systems.
Technically, the OSPW system is equipped with high-performance bearings and special ceramic balls made of third-grade silicon nitrite (best grade achieved for ceramic bearings). The ball bearing cage is made of reinforced polyamide, with a hardened steel race and polished groove. The CeramicSpeed bearing balls are 15% harder, 100% smoother and 99% more resilient than standard ceramic balls. CeramicSpeed bearings are considered the best ceramic bearings in the world.
The bearing cage is made of carbon fibers reinforced with polyamide so that the forces can be better distributed and absorbed and your derailleur works perfectly even in the most adverse conditions.
Coated version
Compared to the already high-quality standard bearings from CeramicSpeed, the "coated" version has a wafer-thin protective layer applied to the bearing rings. As a result, the latter become even harder, have a life cycle that is 60% longer and have even lower rolling resistance.
maintenance
It is important to properly lubricate the bearings to maintain performance and longevity. Simply apply oil to the bearing seals, allowing the oil to penetrate the bearing. Do this whenever you lubricate the chain, or after washing the bike, or after riding in wet and muddy conditions.
IMPORTANT
When travelling, please remember to dismantle the entire rear derailleur, as very few bicycle transport bags offer enough space for the OSPW system. This OSPW system only fits SRAM Road AXS rear derailleurs!
Technical specifications:
intended use : Road, Gravel, Cyclocross
Material cage: carbon, polyamide
Material bearing: coated stainless steel, ceramic
Material wheels: aluminum
Number of teeth on top: 15
Number of teeth below: 19
Compatibility rear derailleur: SRAM Red AXS 12, Force AXS 12, 2020 Red 11 Etap with Orbit Clutch
Compatibility chain: 11/ 12-speed
Largest sprocket: max. 36 teeth (12-speed), max. 32 teeth (11-speed)
Color cage: black
Color derailleur wheels: black or red
Weight according to the manufacturer: kA
Weight weighed: 75.7g
Scope of delivery:
1x CERAMICSPEED OSPW derailleur cage System Coated SRAM Road AXS
1x 15ml oil
Note: The cage does not fit Rival AXS or XPLR rear derailleurs!
