ALUGEAR chainring round ELM Direct Mount | 1-speed narrow-wide Easton Cinch Road/CX/Gravel
Alugear is based in the beautiful city of Krakow, approx. 250 km south-west of the Polish capital Warsaw. The focus is on the development and production of drive components for bicycles, but the range also includes, for example, Ahead caps.
The entire production cycle, from the initial design to the finished product, is carried out entirely by Alugear in Poland. This is the only way to guarantee consistent product quality with low manufacturing tolerances.
ELM
The original Alugear design.
narrow-wide tooth profile
To keep the chain securely in position even without a chain guide, the teeth have a special profile consisting of alternating narrow and wide teeth. The teeth are also shaped so that in muddy conditions the chainring is able to remove the mud itself. Dirt and mud are therefore effectively removed when the chain runs over and friction in the drivetrain is minimized.
Direct mount assembly
The chainring is mounted directly on the crank arm and replaces the possible previous spider. The result is a tidy look that saves weight and offers excellent stiffness at the same time.
Technical data:
Area of application: Road/CX/Gravel
Material: Aluminum 7075-T6
Technology: Narrow Wide, Direct Mount
Bolt circle: -
Mounting: Easton Cinch Direct Mount
Number of teeth: 34, 36, 38, 40, 42, 44, 46, 48 or 50 teeth
Compatibility cranks: Easton Cinch
Chain compatibility: 10-speed, 11-speed or 12-speed (SRAM Eagle & SRAM Flattop AXS, Campagnolo), SRAM Transmission
Mounting position: -
Chainline: n/a
Offset: 3 mm
Adjustment options: none
Range (ovalization): -
Timing (force application): -
Color: black, red, blue, green, orange or silver
Weight according to manufacturer: 34T- 68g, 36T- 72g, 38T- 77g, 40T- 83g, 42T- 92g, 44T- 99g, 46T- 106g, 48T- 114g, 50T- 121g
Weight even weighed: n/a A.
Scope of delivery: 1x ALUGEAR chainring oval ELM Direct Mount | 1-speed narrow-wide Easton Cinch Road/CX/Gravel
