ALUGEAR chainring round Direct Mount | 1-speed narrow-wide Race Face Cinch | BOOST
Alugear is based in the beautiful city of Krakow, about 250 km southwest of the Polish capital Warsaw. The focus is on the development and production of drive components for bicycles, but the range also includes, for example, head caps.
The entire production cycle, from the first draft to the finished product, is realised entirely by Alugear in Poland. Only in this way is it possible to guarantee consistent product quality with low manufacturing tolerances.
narrow-wide tooth profile
In order to keep the chain securely in position even without a chain guide, the teeth have a special profile of narrow and wide teeth alternating. The teeth are also shaped in such a way that in muddy conditions the chainring is very good at removing the mud itself. Dirt and mud are thus effectively removed when the chain overruns and friction in the drivetrain is minimised.
Direct Mount Assembly
The chainring is mounted directly on the crank arm and replaces the possible previous spider. The result is a tidy look that saves weight while providing excellent stiffness.
intended use: MTB
Material: Aluminium 7075-T6
Technology: Narrow Wide, Direct Mount
Bolt circle: -
Mounting: Race Face Cinch Direct Mount
Number of teeth: 26, 28, 30, 32, 34, 36 or 38 teeth
Compatibility cranks: Race Face Cinch
Chain compatibility: 10-speed, 11-speed or 12-speed (SRAM Eagle & Shimano)
Mounting position: -
Offset: 26 teeth - 36 teeth 3 mm offset, 38 teeth 2.5 mm offset
Adjustment options: none
Range (ovalisation): -
Timing (force application): 108° after TDC (top dead centre).
Colour: black, red, blue, green, orange or silver
Weight according to manufacturer:
Weight weighed: 63.6g (34 teeth/round).
Scope of delivery: 1x ALUGEAR chainring round Direct Mount | 1-speed narrow-wide Race Face Cinch | BOOST