ZIPP stem SL Speed ??Carbon +/- 6 ° matt black
When ZIPP engineers develop a carbon stem, you always have one goal - minimal weight, maximum rigidity. Of course, this is not the easiest stem, but also no flexing stem. Thus, the new ZIPP Speed ??SL carbon stem is not only a good choice for the downhill specialist, but also for the rough Gravel or Cyclocross use.
Zipp has achieved the very good stiffness-to-weight ratio through the use of SRAM Exogram ™ technology, which achieves minimal material expenditure with maximum rigidity. This is achieved by a hollow carbon body, which can be made significantly thinner at unloaded points, without changing the outer shape. With this technique, ZIPP achieves a weight of 123g (100mm).
The ZIPP stem comes in a solid look, with a beautiful surface finish and fits perfectly on voluminous carbon steerer tubes. The almost seamless transition from fork clamp to stem underlines the massive appearance. For graceful steel frames, this stem is not intended.
On the feature side of the ZIPP Speed ??SL there is a 50 mm wide custom-fit, removable, 4-bolt handlebar clamp, flip / flop technology with - / + 6 ° and a 2-bolt fork clamp. The screws are T25 Torx titanium bolts because the Torx technology does not over-tighten and allow for better torque. The matching Torx key is enclosed with the stem.
Screws: Titanium, Torx T25
Shaft clamping: 1 1/8 "
Handlebar clamp: removable, Ø 31.8 mm
Angle: +/- 6 ° flip flop
Installation height of the fork shaft: 41 mm
Lengths: 70, 80, 90, 100, 110 or 120 mm
Color: black, matte black Zipp logos
Finish: UD Carbon matt
Weight: 122g (100mm)