ZIPP 303 Front NSW Carbon Clincher
Making the most aerodynamic and seitenwindstabilste rim profile even better? Before this task, the Zipp engineers were when they tried to develop on the basis of outstanding Firecrest rim profile even more efficient impeller. With the NSW impellers succeeded in every way to bring the Firecrest series to the next level. The 303 wheelset is the perfect all-rounder among NSW impellers. Easy enough for the high mountains, aerodynamic enough for long solo rides in wind and sturdy enough for the cobblestones and the training routine.
In the development of Cognition hub was a target in the first place: Maximum speed! This was achieved in several ways. Firstly, specifically adapted to the hub Swiss ball bearings are installed, the guarantee in addition to their enormous durability lowest bearing resistance.
Showstopper braking surfaces
Among the carbon rims include the braking characteristics of the Firecrest rims of the best on the market. But that was the engineers of Zipp still not good enough. The newly developed Showstopper braking surfaces contain silicon carbide. This material is harder than steel and provides a uniform braking power at very high levels. Yet this, it is extremely abrasion resistant and the outstanding features of the brake surfaces thus remain over the entire life of the rim obtained. The wet braking properties to improve the water and dirt during braking has been incorporated into the brake surfaces of a structure, transported faster. In dry conditions the grooves of the heat dissipation, thus improving braking performance on long runs make.
ABLC Sawtooth Technology
The rim of the NSW wheelsets equips Zipp from his proven ABLC Dimple Design. This helps, as in the surface of a golf ball, for directing the air flow efficiently over the rim. Another new feature is the arrangement of dimples in 12 blocks wtube compartments are connected by a sawtooth profile. By this arrangement, the air resistance of the wheels could be further reduced and the positive effect sets in NSW rim a even at speeds above 30 km / h.
With Impress technology, the images are printed directly on the impeller. This saves weight and helps ABLC Dimpledesign while fulfilling its mission - to eliminate air turbulence.
The impeller may only be used with the following pads:
Zipp Tangente Platinum Pro Evo
Zipp Tangente High Performance Cork
Zipp Tangente Platinum Pro (first version of Tangent pads)
Swissstop Black Prince
Swiss Stop Yellow King
intended use: Road
Material rim: Carbon
Rim Type: carbon clincher for folding and Clincher
Rim height: 45 mm
Maximum rim width: 28.5 mm
Rim width braking surface: 26,40 mm
Rim inner diameter: 17,25 mm
Spokes: Sapim Cx-Ray
Hub: Zipp Cognition
Achsstandard: 5x100 mm quick release
Colour Hub and rim: black, UD Carbon
Color Decals: white ImPress graphics
maximum tire pressure: 8.62 bar / 125 psi
Maximum rider weight: 115 Kg
Weight: 640g (manufacturer)
Scope of supply: Front wheel, wheel bag, rim tape, Zipp Tangente titanium quick release, Zipp Tangente Platinum Pro Brake Pads, Zipp Tangente tube, valve extension and manual
Mounting: Please use the correct mounting of the guidance manufacturer .
INFO: only available for European + Russian Customers