Wheelset 29" XC | Extralite MTB Straightpull 6-hole hubs | ENVE carbon rims
intended use : Cross Country XC
This wheelset is for all racers who want it classy, fast and light. The indestructible Extralite hubs and the excellently processed ENVE carbon rims also forgive a driving mistake. The balanced selection of components guarantees you high reliability and a long service life.
hubs
The Extralite hubs set standards in all respects. They are light, beautiful, reliable and convertible to different axle type standards. The design of the hubs has been optimized using modern simulation technology and, with the oversized shape, offers an optimal power flow in the material.
The freewheel is realized via a toothed disc, which engages directly with a toothing incorporated in the freewheel. In order to safely transmit even the highest forces, all teeth always mesh. This not only results in a noticeably lower idle travel until adhesion, but also an incomparable sound. This extremely direct power transmission offers clear advantages, especially when accelerating hard or in technically difficult terrain. In addition, the 2nd generation has an improved seal between the hub body and the freewheel and is easier to maintain. If the teeth are worn out, they can be replaced and the function restored.
The main advantages of straightpull hubs are, in addition to the more modern design, non-contact spokes that do not cause any unpleasant noise and spoke heads that cannot work into the spoke flange. If desired, the straightpull hubs can also be spoked crosswise.
rims
ENVE carbon rims are developed by ENVE in the USA and manufactured to the highest quality standards at the headquarters in Utah. The ENVE engineers have years of experience with the use of carbon in the field of cycling and know what requirements a top product like these carbon rims must meet. At ENVE, everything is done to use the advantages of carbon and eliminate its disadvantages. Stiff and extremely light rims were developed in which all fibers can run without interruption, which corresponds to the best possible utilization of the material strengths. This principle was perfected in the spoke holes, in which continuous fiber strands form the mount for the spoke nipples. Aluminum inserts, which are common with other carbon rims, can therefore be dispensed with during production. This reduces the weight and at the same time allows significantly higher spoke tensions, which in turn allow the construction of stiffer wheels.
Impeller construction at R2-Bike
Our wheels are assembled entirely by hand by our wheel builders. During the entire construction, it is important that not only the concentricity is right, but also that the spoke tension is as even as possible. The special care allows us to give a lifetime guarantee against broken spokes, as long as this is not caused by violence!
You will also receive the following services with our wheels:
A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths to be able to repair the impeller at short notice even after an accident.
A free initial check of the impeller, where the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge for the material!
Technical specifications:
intended use : Cross Country XC
Wheel size: 29" (ETRTO: 622 x 25)
Rim Type: Clincher (clincher and folding)
Brake type: disc brake
Brake disc mount: 6-hole
weights:
1212g (lightest variant: Boost + Boost, ENVE M525, Sapim CX-Ray)
1301g (heaviest variant: Lefty 2.0 + Boost, ENVE M525, Sapim Race)
Notice:
Due to manufacturing variations in all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals/rim stickers.
The specified delivery time refers to the usual time it takes to assemble the wheelset and does not reflect the availability of the individual parts.
If you would like special spokes on the rear wheel, e.g. for the Cannondale Ai rear triangle or for EVO6, please contact our service team.
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x assembly certificate
2x hologram stickers