Wheelset 29" XC | DT Swiss 350 straightpull 6-hole hubs | Newmen Advanced SL XA30 carbon rims | SRAM XD | Sapim CX-Ray
Area of intended use : Cross Country XC, Marathon
XC racers always want to win and are therefore looking for light yet stable wheels. The combination of Newmen carbon rims and DT-Swiss hubs should therefore always be shortlisted. The balanced selection of components guarantees you high reliability and a long service life.
Hubs DT Swiss 350 Straightpull 6-hole
Switzerland is known for good chocolate, first-class cheese and wonders of precision engineering. The dedication to detail that produces these products is also reflected in the DT Swiss 350 hubs. Above all, the love for mechanics is easy to identify. Due to their simple but well thought-out construction, the current 350 hubs have become significantly lighter compared to the previous versions. The Ratchet freewheel system, tried and tested by the DT-Swiss 240 hubs, makes the hubs an extremely reliable companion. Compared to pawl systems, the built-in toothed disc freewheel offers a larger power transmission, which significantly reduces wear. With 36 teeth, the hub reacts very directly to acceleration. The new shape of the end caps makes dismantling even easier, so that changing over to other axle type standards is even easier.
Rims Newmen Advanced SL XA30 Carbon
Like all Newmen carbon rims, the Advanced SL XA30 rim consists of high-end UD fibers and impresses with first-class mechanical properties and extremely low weight. It is the ideal basis for a light cross-country wheelset.
The hookless construction predestines them for tubeless use. The significantly reinforced rim flange withstands possible punctures better and allows driving with little air pressure. In order to avoid weak points and increase the service life, the spoke holes were drilled using a special method. The inner width, which is very large for cross-country rims, also gives wide tires a reliable hold. The shape of the tire is rounder due to the flanks being placed slightly outwards, which means that a significantly better cornering grip and increased safety are achieved.
Spokes SAPIM CX-Ray
With the CX-Ray, Sapim has succeeded in developing an extraordinary spoke. In addition to its low weight, it has exceptional resilience and flexibility. This also results in the large area of intended use . It doesn't matter whether you are a racing cyclist or a mountain biker, everyone benefits from these positive characteristics. In addition, the flattened center section ensures excellent aerodynamics. The high material quality enables the construction of stable wheels and guarantees a long service life.
Sapim's CX-Ray spokes can be installed in all standard hub holes.
Impeller construction at R2-Bike
Our wheels are assembled entirely by hand by our wheel builders. During the entire construction, it is important that not only the concentricity is right, but also that the spoke tension is as even as possible. The special care allows us to give a lifetime guarantee against broken spokes, as long as this is not caused by violence.
You will also receive the following services with our wheels:
A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths, so that the wheel can be repaired at short notice even after an accident.
A free initial check of the impeller, where the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise: If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge for the material!
Technical specifications:
Area of intended use : cross country, marathon
Wheel size: 29"
Rim Type: Clincher and Foldable
Brake type: disc brake
Brake pads: -
Material rims: carbon
Internal width: 30mm
External width: 36mm
Rim Height: 20mm
Number of holes: front 28 / rear 28
Spokes: Sapim CX-Ray 2.0 | 0.9 - 2.2 | 2.0, black
Lacing pattern: 3-crossed at the front | crossed 3 times at the back
Axle standard front: axle type mm Boost
Rear axle type standard: 12x148 mm Boost
Brake disc mount: 6-hole
bearing front: 2x industrial bearings
Bearing rear: 4x industrial bearing
Freewheel Compatibility: 11-, 12-speed SRAM XD
Freewheel type: Ratchet, 2 toothed washers, 36 detents
recommended tire width: 58-66 mm
maximum tire pressure: 2.5 bar
maximum system weight: 125 kg (rider, bike, clothing and possibly luggage)
tubeless capable: yes
Valve hole: Presta valve (SV)
Color rim / finish: black / UD carbon satin finish
Color decor: white-grey
Color hubs: black with white lettering
Weight according to the manufacturer: 1386g (without valves and rim tape)
Weight weighed: 1412g (set), 658g (front wheel), 754g (rear wheel) - indication with valves and rim tape
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x assembly certificate
2x hologram stickers
2x tubeless valve
Tubeless rim tape