Wheelset 29" XC | DT Swiss 240 EXP MTB Straightpull 6-Hole Hubs | Duke Carbon Rims

Description

Wheelset 29" XC | DT Swiss 240 EXP MTB straightpull 6-hole hubs | Duke carbon rims

intended use : Cross Country XC

XC racers always want to win and are therefore looking for light yet stable wheels. The combination of Duke carbon rims and DT-Swiss hubs should therefore always be shortlisted. The balanced selection of components guarantees you high reliability and a long service life.

hubs
Lighter, stiffer, more precise and easier to maintain - these are the strengths of the newly launched DT Swiss 240 hubs. These properties were achieved through the Ratchet EXP technology. With this, the hubs not only get by with fewer components and thus lower weight and less wear, it also allows the bearing on the drive side to be placed significantly further out. The larger distance between the bearings results in a higher rigidity of the hub, a lower bearing load and thus greater durability. The stiffness on the hub body serves to distribute the load more evenly on the spokes. Driving and braking forces are transmitted even better from both spoke flanges to all spokes. Unilateral peak loads are prevented, which protects the hub, spokes and rim. The super reliable toothed disc freewheel system with its large contact surface and 36 locking points ensures extremely direct and reliable power transmission

rims
The carbon rims from Duke from France stand for low weight and excellent workmanship. The hookless construction is ideal for using tubeless systems. The reinforced bead means that any punctures can be better tolerated without causing damage. The fairly flat and wide rims reliably support the tires in every situation, so you don't have a spongy driving experience even with little air pressure.
The asymmetrical shape enables more even spoke tension, which further increases the rigidity of the entire wheel.

Impeller construction at R2-Bike

Our wheels are assembled entirely by hand by our wheel builders. During the entire construction, it is important that not only the concentricity is right, but also that the spoke tension is as even as possible. The special care allows us to give a lifetime guarantee against broken spokes, as long as this is not caused by violence!

You will also receive the following services with our wheels:

A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths to be able to repair the impeller at short notice even after an accident.
A free initial check of the impeller, where the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge for the material!

Technical specifications:

intended use : Cross Country XC
Wheel size: 29" (ETRTO: 622 x see detailed description)
Rim Type: Clincher (clincher and folding)
Brake type: disc brake
Brake disc mount: 6-hole

weights:

1139g (lightest variant: 15x100 mm + 12x142 mm, Duke Lucky Jack Ultra, Sapim CX-Ray)
1311g (heaviest variant: Boost + SuperBoost, Duke Lucky Jack SLS2, Sapim Race)

Notice:
Due to manufacturing variations in all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals/rim stickers.

The specified delivery time refers to the usual time it takes to assemble the wheelset and does not reflect the availability of the individual parts.

If you would like special spokes on the rear wheel, e.g. for the Cannondale Ai rear triangle or for EVO6, please contact our service team.

Scope of delivery:

1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x assembly certificate
2x hologram stickers

SKU:	46131
Item weight:	1.139g

from

1.427,50 €

MSRP: 1.697,48 €

Save 15%, i.e. 269,98 €

incl. 19% VAT , Free shipping to DE. (Sperrgut)

handmade - in about 6 - 8 weeks

handmade - in about 6 - 8 weeks

This item is assembled for you in elaborate handwork. Due to limited capacities of our wheel builders, we currently need approx. 6 - 8 weeks for this. After completion, the item will arrives you 2 - 6 business days later (in the EU).
more shipping info: Link »

Configure

Credit Card, PayPal, Amazon...

Secure Transaction

Refund within 100 Days

Free Return

DT Swiss Front Hub Straightpull 6-Hole

DT Swiss 240 EXP | 15x100 mm Thru Axle | SKU 45517: Brake disc mount: 6-Hole
Spoke type: Straightpull (straight)
Storage: 2x industrial ball bearings
Color: black with white-red decals
Weight: 111g

DT Swiss 240 EXP | 15x110 mm Thru Axle Boost | SKU 45520: Brake disc mount: 6-Hole
Spoke type: Straightpull (straight)
Storage: 2x industrial ball bearings
Color: black with white-red decals
Weight: 118g

With the 110 millimeter wide BOOST hub, stiffer wheels with a more even spoke angle can be built on both sides thanks to a wider flange spacing.

DT Swiss Rear Hub Straightpull 6-Hole

DT Swiss 240 EXP | 12x142 mm Thru Axle | Shimano/SRAM MTB | Art.-Nr. 45552: Brake disc mount: 6-Hole
Spoke Type: Straightpull
Storage: 4x industrial ball bearings
Freewheel type: 2 tooth lock washers, 36 grids
Freewheel compatibility: 8-, 9-, 10-, 11-speed Shimano / SRAM MTB
Color: black with white-red decals
Weight: 215g

DT Swiss 240 EXP | 12x142 mm Thru Axle | SRAM XD | Art.-Nr. 45553: Brake disc mount: 6-Hole
Spoke type: Straightpull (straight)
Storage: 4x industrial ball bearings
Freewheel type: 2 tooth lock washers, 36 grids
Freewheel compatibility: 11-, 12-speed SRAM XD
Color: black with white-red decals
Weight: 204g

DT Swiss 240 EXP | 12x148 mm Thru Axle Boost | Shimano/SRAM MTB | Art.-Nr. 45555: Brake disc mount: 6-Hole
Spoke type: Straightpull (straight)
Storage: 4x industrial ball bearings
Freewheel type: 2 tooth lock washers, 36 grids
Freewheel compatibility: 8-, 9-, 10-, 11-speed Shimano / SRAM MTB
Color: black with white-red decals
Weight: 209g

With the 148 millimeter wide BOOST hub, stiffer wheels with a more even spoke angle can be built on both sides thanks to a wider flange spacing.

DT Swiss 240 EXP | 12x148 mm Thru Axle Boost | SRAM XD | SKU 45556: Brake disc mount: 6-Hole
Spoke Type: Straightpull
Storage: 4x industrial ball bearings
Freewheel type: 2 tooth lock washers, 36 grids
Freewheel compatibility: 11-, 12-speed SRAM XD
Color: black with white-red decals
Weight: 207g

With the 148 millimeter wide BOOST hub, stiffer wheels with a more even spoke angle can be built on both sides thanks to a wider flange spacing.

DT Swiss 240 EXP | 12x148 mm Thru Axle Boost | Shimano Micro Spline | SKU 45554: Brake disc mount: 6-Hole
Spoke type: Straightpull (straight)
Storage: 4x industrial ball bearings
Freewheel type: 2 tooth lock washers, 36 grids
Freewheel compatibility: 12-speed Shimano Micro Spline
Color: black with white-red decals
Weight: 215g

With the 148 millimeter wide BOOST hub, stiffer wheels with a more even spoke angle can be built on both sides thanks to a wider flange spacing.

DT Swiss 240 EXP | 12x157 mm Thru Axle SuperBoost | Shimano/SRAM MTB | SKU 45557: Brake disc mount: 6-hole
Spoke type: Straightpull (straight)
Storage: 4x industrial ball bearings
Freewheel type: 2 tooth lock washers, 36 grids
Freewheel compatibility: 8-, 9-, 10-, 11-speed Shimano / SRAM MTB
Color: black with white-red decals
Weight: 222g

With the 157 millimeter wide SuperBOOST hub, stiffer wheels with a more even spoke angle can be built on both sides thanks to a wider flange spacing. In addition, the wider rear triangle allows the use of more voluminous tires.

DT Swiss 240 EXP | 12x157 mm Thru Axle SuperBoost | SRAM XD | SKU 45564: Brake disc mount: 6-hole
Spoke Type: Straightpull
Storage: 4x industrial ball bearings
Freewheel type: 2 tooth lock washers, 36 grids
Freewheel compatibility: 11-, 12-speed SRAM XD
Color: black with white-red decals
Weight: 211g

With the 157 millimeter wide SuperBOOST hub, stiffer wheels with a more even spoke angle can be built on both sides thanks to a wider flange spacing. In addition, the wider rear triangle allows the use of more voluminous tires.

DT Swiss 240 EXP | 12x157 mm Thru Axle SuperBoost | Shimano Micro Spline | SKU 45562: Brake disc mount: 6-hole
Spoke type: Straightpull (straight)
Storage: 4x industrial ball bearings
Freewheel type: 2 tooth lock washers, 36 grids
Freewheel compatibility: 12-speed Shimano Micro Spline
Color: black with white-red decals
Weight: 219g

With the 157 millimeter wide SuperBOOST hub, stiffer wheels with a more even spoke angle can be built on both sides thanks to a wider flange spacing. In addition, the wider rear triangle allows the use of more voluminous tires.

Duke Rims Carbon Cross Country

DUKE Lucky Jack SLS4 6TERS 28 + 26 | Drilling 28/28 | SKU 58413 + 58412: Application: Cross Country XC
ETRTO: front 622x28 - rear 622x25.6
Inner width: front 28 mm - rear 25.6 mm
External width: front 34 mm - rear 31.5 mm
Rim height: front 20.5 mm - rear 19 mm
Offset: front 2.8 mm - rear 2.6 mm
Recommended tire width: front 50 to 66 mm - rear 34 to 60 mm
maximum tire pressure: 2.5 bar
maximum system weight: 110 kg (driver, bike, clothing and possibly luggage)
Color / finish: black / UD silk gloss
Weight: front 302g - rear 285g

DUKE Lucky Jack SLS4 6TERS 30 + 26 | Drilling 28/28 | SKU 58414 + 58412: Application: Cross Country XC
ETRTO: front 622x30.5 - rear 622x25.6
Inner width: front 30.5 mm - rear 25.6 mm
External width: front 36.5 mm - rear 31.5 mm
Rim height: front 20.5 mm - rear 19 mm
Offset: front 2.8 mm - rear 2.6 mm
Recommended tire width: front 53 to 70 mm - rear 34 to 60 mm
maximum tire pressure: 2.5 bar
maximum system weight: 110 kg (driver, bike, clothing and possibly luggage)
Color / finish: black / UD silk gloss
Weight: front 310g - rear 285g

DUKE Lucky Jack SLS4 6TERS 30 + 28 | Drilling 28/28 | SKU 58414 + 58413: Application: Cross Country XC
ETRTO: front 622x30.5 - rear 622x28
Inner width: front 30.5 mm - rear 28 mm
External width: front 36.5 mm - rear 34 mm
Rim height: front 20.5 mm - rear 20.5 mm
Offset: front 2.8 mm - rear 2.8 mm
Recommended tire width: front 53 to 70 mm - rear 50 to 66 mm
maximum tire pressure: 2.5 bar
maximum system weight: 110 kg (driver, bike, clothing and possibly luggage)
Color / finish: black / UD silk gloss
Weight: front 310g - rear 302g

DUKE Lucky Jack Ultra SLS4 6TERS 28 + 25 | Drilling 28/28 | SKU 58387 + 58388: Application: Cross Country XC
ETRTO: front 622x28 - rear 622x24.5
Internal width: front 28 mm - rear 24.5 mm
External width: front 33 mm - rear 30 mm
Rim height: front 19 mm - rear 18 mm
Offset: VR 2.8mm - RW 2.4mm
recommended tire width: front 50 to 66 mm - rear 32 to 60 mm
maximum tire pressure: 2.5 bar
Maximum system weight: 95 kg (rider, bike, clothing and possibly luggage)
Colour/Finish: black / UD satin finish
Weight: FW 267g - RW 264g

DUKE Lucky Jack Ultra SLS4 6TERS 30 + 25 | Drilling 28/28 | SKU 58390 + 58388: Application: Cross Country XC
ETRTO: front 622x30,5 - rear 622x24.5
Internal width: front 30,5 mm - rear 24.5 mm
External width: front 36 mm - rear 30 mm
Rim height: front 20,5 mm - rear 18 mm
Offset: VR 2.8mm - RW 2.4mm
recommended tire width: front 50 to 66 mm - rear 32 to 60 mm
maximum tire pressure: 2.5 bar
Maximum system weight: 95 kg (rider, bike, clothing and possibly luggage)
Colour/Finish: black / UD satin finish
Weight: FW 284g - RW 264g

DUKE Lucky Jack Ultra SLS4 6TERS 30 + 28 | Drilling 28/28 | SKU 58390 + 58387: Application: Cross Country XC
ETRTO: front 622x30,5 - rear 622x28
Internal width: front 30,5 mm - rear 28 mm
External width: front 36 mm - rear 33 mm
Rim height: front 20,5 mm - rear 19 mm
Offset: VR 2.8mm - RW 2.8mm
recommended tire width: front 50 to 66 mm - rear 50 to 66 mm
maximum tire pressure: 2.5 bar
Maximum system weight: 95 kg (rider, bike, clothing and possibly luggage)
Colour/Finish: black / UD satin finish
Weight: FW 284g - RW 267g

Spokes

Sapim Race Round Spoke black: Area of ??application: MTB, Gravel, E-Bike
Weight incl. nipple: approx. 6.95g (1 piece)

By far the most popular spoke in the Sapim range is the indestructible Race. Despite the still low weight, the most stable wheels can be built with it. The elastic middle part easily copes with high peak loads. A real all-rounder with which you can throw yourself into any adventure.

Sapim D-Light Round Spoke black: Intended use: Cross Country, Trail, All Mountain, Gravel, BMX
Weight including nipple: approx. 5.95g (1 piece)

Sapim places the D-Light between the Laser and the Race. It's not quite as light as the former, but it's almost as durable as the stable Race. This makes it interesting even for BMX riders. The tapered middle section is able to absorb even high peak loads, thereby minimizing the risk of breakage. At the same time, it is stiff enough to prevent unwanted torsion during wheel building, which simplifies the process and enables durable wheels. The sum of the properties makes the Sapim D-Light a universal spoke with which there are almost no limits.

SAPIM Spoke CX Ray bladed black: Application: Cross Country, Trail, Gravel, Road
Weight incl. nipple: approx. 5.45g (1 piece)

With the CX-Ray, Sapim has succeeded in developing an extraordinary spoke. In addition to its low weight, it has exceptional resilience and flexibility. This also results in the large range of applications. It doesn't matter whether you are a racing cyclist or a mountain biker, everyone benefits from these positive characteristics. In addition, the flattened center section ensures excellent aerodynamics. The high material quality enables the construction of stable wheels and guarantees a long service life.

SAPIM Spoke CX Ray bladed silver: Application: Cross Country, Trail, Gravel, Road
Weight incl. nipple: approx. 5.45g (1 piece)

With the CX-Ray, Sapim has succeeded in developing an extraordinary spoke. In addition to its low weight, it has exceptional resilience and flexibility. This also results in the large range of applications. It doesn't matter whether you are a racing cyclist or a mountain biker, everyone benefits from these positive characteristics. In addition, the flattened center section ensures excellent aerodynamics. The high material quality enables the construction of stable wheels and guarantees a long service life.

DT Swiss Aerolite Flat Spoke black: Application: Cross Country, Trail, Gravel, Road
Weight incl. nipple: approx. 5.5g (1 piece)

The DT Swiss Aerolite has been the first choice of many wheel builders for building high-end wheelsets for years. With its middle section flattened to 0.9 millimeters, the Aerolite cuts particularly well through the air and helps you to save some watts at high speeds. In addition, it is the lightest flat spoke in the DT-Swiss range. The spoke is first butted to a thickness of 1.5 mm in a cold forging process and then flattened in a further process. This complex process further increases the strength and gives the Aerolite its high stability and durability. Thanks to these properties, the bladed spoke can be used on racing bikes or mountain bikes and fits into all hubs with standard bores.

DT Swiss Revolite Spoke silver: Area of use: MTB, Gravel
Weight including nipple: approx. 5.5g (1 piece)

The DT Swiss Revolite spoke combines low weight and durability. In the course of the development process, various variants were tested extensively until the final shape and choice of raw materials were determined. The result is a cross-shaped cross-section flattened on one side, which is considered the best compromise between the above properties. In addition, a special, patented cold forging process ensures that the material is compressed and thus also increases stability. Nevertheless, the spokes can also digest harder blows, which makes them particularly suitable for use on mountain bikes.

DT Swiss Revolite Spoke black: Area of use: MTB, Gravel
Weight including nipple: approx. 5.5g (1 piece)

The DT Swiss Revolite spoke combines low weight and durability. In the course of the development process, various variants were tested extensively until the final shape and choice of raw materials were determined. The result is a cross-shaped cross-section flattened on one side, which is considered the best compromise between the above properties. In addition, a special, patented cold forging process ensures that the material is compressed and thus also increases stability. Nevertheless, the spokes can also digest harder blows, which makes them particularly suitable for use on mountain bikes.

Colour Spoke Nipples

Nipples black: Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Nipples red: Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Nipples blue: Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Nipples gold: Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Nipples orange: Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Nipples silver: Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Nipples green: Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Nipples acid green: Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Nipples purple: Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Rim Tape | Tubeless Kit