Wheelset 29" TR AM | Tune MTB 6-Hole Hubs | MCFK Carbon Rims

Brake disc mount: 6-hole
Spoke type: J-Bend (curved)
Storage: 4x industrial ball bearings (1 with special solid lubricant)
Freewheel type: 3 pawls, 27 grids
Freewheel compatibility: 12-speed SRAM XDR, 11-, 12-speed SRAM XD with spacer
Color: black, red, blue, gold, poison green, orange or silver
Weight: 220g

For use in adverse weather conditions, the endurance variant's left outer and most heavily loaded ball bearing is filled with a special solid lubricant that can also cope with the use of high-pressure cleaners. In addition, the freewheel body of the Endurance rear hub has been reinforced to better absorb the high leverage of wide-range cassettes over the long term.
With the 148 millimeter wide BOOST hub, stiffer wheels with a more even spoke angle can be built on both sides thanks to a wider flange spacing.

Area of ??application: Trail TR, All Mountain AM
ETRTO: 622x30
Inner width: 30 mm
Outside width: 36 mm
Rim height: 29 mm
Offset: 3.5 mm (asymmetrical)
recommended tire width: up to 65 mm
maximum tire pressure: 5 bar
maximum system weight: 125 kg (driver, bike, clothing and possibly luggage)
Color / finish: black / UD matt / Decals white
Weight: 375g

Area of ??use: Trail TR, All Mountain AM
ETRTO: 622x30
Inner width: 30 mm
External width: 36 mm
Rim height: 29 mm
Offset: 3.5 mm (asymmetrical)
Recommended tire width: up to 65 mm
maximum tire pressure: 5 bar
maximum system weight: 125 kg (driver, bike, clothing and possibly luggage)
Color / finish: black / UD matt / decals black
Weight: 375g

Area of ??application: Trail TR, All Mountain AM
ETRTO: 622x30
Inner width: 30 mm
Outside width: 36 mm
Rim height: 29 mm
Offset: 3.5 mm (asymmetrical)
recommended tire width: up to 65 mm
maximum tire pressure: 5 bar
maximum system weight: 125 kg (driver, bike, clothing and possibly luggage)
Color / finish: black / 3K silk matt / Decals white
Weight: 375g

Area of ??application: Trail TR, All Mountain AM
ETRTO: 622x30
Inner width: 30 mm
Outside width: 36 mm
Rim height: 29 mm
Offset: 3.5 mm (asymmetrical)
recommended tire width: up to 65 mm
maximum tire pressure: 5 bar
maximum system weight: 125 kg (driver, bike, clothing and possibly luggage)
Color / finish: black / 3K silk matt / Decals black
Weight: 375g

Intended use: All Mountain AM
ETRTO: 622x35
Inside width: 35 mm
Outside width: 44 mm
Rim height: 29 mm
Offset: 3.5 mm (asymmetrical)
recommended tire width: 55 - 75 mm
maximum tire pressure: 5 bar
maximum system weight: 125 kg (driver, bike, clothing and possibly luggage)
Color / finish: black / UD matt 7 Decals white
Weight: 421g

Intended use: All Mountain AM
ETRTO: 622x35
Inside width: 35 mm
Outside width: 44 mm
Rim height: 29 mm
Offset: 3.5 mm (asymmetrical)
recommended tire width: 55 - 75 mm
maximum tire pressure: 5 bar
maximum system weight: 125 kg (driver, bike, clothing and possibly luggage)
Color / finish: black / UD matt / Decals black
Weight: 421g

Intended use: All Mountain AM
ETRTO: 622x35 mm
Inside width: 35 mm
Outside width: 44 mm
Rim height: 29 mm
Offset: 3.5 mm (asymmetrical)
recommended tire width: 55 - 75 mm
maximum tire pressure: 5 bar
maximum system weight: 125 kg (driver, bike, clothing and possibly luggage)
Color / finish: black / 3K silk matt / Decals white
Weight: 395g (manufacturer information)

Area of ??application: MTB, Gravel, E-Bike
Weight incl. nipple: approx. 6.95g (1 piece)

By far the most popular spoke in the Sapim range is the indestructible Race. Despite the still low weight, the most stable wheels can be built with it. The elastic middle part easily copes with high peak loads. A real all-rounder with which you can throw yourself into any adventure.

Intended use: Cross Country, Trail, All Mountain, Gravel, BMX
Weight including nipple: approx. 5.95g (1 piece)

Sapim places the D-Light between the Laser and the Race. It's not quite as light as the former, but it's almost as durable as the stable Race. This makes it interesting even for BMX riders. The tapered middle section is able to absorb even high peak loads, thereby minimizing the risk of breakage. At the same time, it is stiff enough to prevent unwanted torsion during wheel building, which simplifies the process and enables durable wheels. The sum of the properties makes the Sapim D-Light a universal spoke with which there are almost no limits.

Application: Cross Country, Trail, Gravel, Road
Weight incl. nipple: approx. 5.45g (1 piece)

With the CX-Ray, Sapim has succeeded in developing an extraordinary spoke. In addition to its low weight, it has exceptional resilience and flexibility. This also results in the large range of applications. It doesn't matter whether you are a racing cyclist or a mountain biker, everyone benefits from these positive characteristics. In addition, the flattened center section ensures excellent aerodynamics. The high material quality enables the construction of stable wheels and guarantees a long service life.

Application: Cross Country, Trail, Gravel, Road
Weight incl. nipple: approx. 5.45g (1 piece)

With the CX-Ray, Sapim has succeeded in developing an extraordinary spoke. In addition to its low weight, it has exceptional resilience and flexibility. This also results in the large range of applications. It doesn't matter whether you are a racing cyclist or a mountain biker, everyone benefits from these positive characteristics. In addition, the flattened center section ensures excellent aerodynamics. The high material quality enables the construction of stable wheels and guarantees a long service life.

Application: Cross Country, Trail, Gravel, Road
Weight incl. nipple: approx. 5.5g (1 piece)

The DT Swiss Aerolite has been the first choice of many wheel builders for building high-end wheelsets for years. With its middle section flattened to 0.9 millimeters, the Aerolite cuts particularly well through the air and helps you to save some watts at high speeds. In addition, it is the lightest flat spoke in the DT-Swiss range. The spoke is first butted to a thickness of 1.5 mm in a cold forging process and then flattened in a further process. This complex process further increases the strength and gives the Aerolite its high stability and durability. Thanks to these properties, the bladed spoke can be used on racing bikes or mountain bikes and fits into all hubs with standard bores.

Area of ??use: MTB, Gravel
Weight including nipple: approx. 5.5g (1 piece)

The DT Swiss Revolite spoke combines low weight and durability. In the course of the development process, various variants were tested extensively until the final shape and choice of raw materials were determined. The result is a cross-shaped cross-section flattened on one side, which is considered the best compromise between the above properties. In addition, a special, patented cold forging process ensures that the material is compressed and thus also increases stability. Nevertheless, the spokes can also digest harder blows, which makes them particularly suitable for use on mountain bikes.

Area of ??use: MTB, Gravel
Weight including nipple: approx. 5.5g (1 piece)

The DT Swiss Revolite spoke combines low weight and durability. In the course of the development process, various variants were tested extensively until the final shape and choice of raw materials were determined. The result is a cross-shaped cross-section flattened on one side, which is considered the best compromise between the above properties. In addition, a special, patented cold forging process ensures that the material is compressed and thus also increases stability. Nevertheless, the spokes can also digest harder blows, which makes them particularly suitable for use on mountain bikes.

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g