shipping country:

Wheelset 29" TR AM EN | NONPLUS Components 6-Hole Hubs | ENVE Carbon Rims

Item number:
Product weight: 1376 g
Brands: r2-bike

from 3.127,50 €
MSRP: 3.371,68 €
You save 7,24%, that is 244,18 €

including 19% VAT. , free shipping (DE) / shipping time info (Sperrgut)

handmade - in about 2 - 3 months
Configure now

We can't deliver this item to your chosen country.

NONPLUS Components Front Hub J-Bend 6-Hole
NONPLUS Components Front Hub J-Bend 6-Hole
  • Brake disc mount: 6-hole
    Spoke type: J-Bend (curved)
    Storage: 2x industrial deep groove ball bearings
    Color: Black
    Weight: 86g

    With the 110 millimeter wide BOOST hub, stiffer wheels with a more even spoke angle can be built on both sides thanks to a wider flange spacing.

NONPLUS Components Rear Hub J-Bend 6-Hole
NONPLUS Components Rear Hub J-Bend 6-Hole
  • Brake disc mount: 6-hole
    Spoke type: J-Bend (curved)
    Storage: 4x industrial ball bearings
    Freewheel type: bevel gearing with 45 detents
    Freewheel compatibility: 12-speed Shimano Micro Spline 
    Color: Black
    Weight: 187g

    With the 157 millimeter wide SuperBOOST hub, stiffer wheels can be built with a more even spoke angle on both sides thanks to a wider flange distance. In addition, the wider rear end allows the use of bulky tires.

ENVE Rims Trail - All Mountain - Enduro
ENVE Rims Trail - All Mountain - Enduro
  • Area of ??application: Enduro EN
    ETRTO: 622x30
    Inner width: 30 mm
    Outside width: 42 mm
    Rim height: 27 mm
    Offset: 0.0 mm (symmetrical)
    Recommended tire width: 2.35 - 2.6 inches
    maximum tire pressure: 2.4 bar (with 110 kg rider weight and tubeless body)
    maximum system weight: n / a
    Color / finish: black / UD matt
    Weight: 672g
  • Application: Road, Gravel, Cross Country, Trail
    Weight incl.nipple: approx. 5.45g (1 piece)

    The wing spoke made of cold drawn Sweden steel has an elliptical shape which takes advantage of the flat, light and aerodynamically more favorable but weak aero spoke and the stronger but less aerodynamic and heavy classic round spoke. This gives it the diameter necessary for torque transmission and at the same time favorable and superior aerodynamic properties with low weight!

Tubeless Kit Assembly
Tubeless Kit Assembly
  • We assemble the enclosed original ENVE tubeless kit.
Your configuration
Product details


Wheelset 29 "TR AM EN | NONPLUS Components 6-hole hubs | ENVE carbon rims

intended use : Trail TR, All Mountain AM to Enduro EN

With this wheelset you can really let it rip even in difficult terrain. The light and stable NONPLUS Components hubs as well as the excellently processed ENVE rims forgive driving mistakes. The balanced selection of components guarantees you a high level of reliability and a long service life.

The small forge from Murr in Baden-Württemberg has been manufacturing lightweight yet stable bicycle hubs since 2018. New concepts are constantly being developed and patents registered so that new standards can also be set in the future.
A hub body, made of high-quality, hard-anodized aluminum, rotates around the elaborately sealed industrial deep groove ball bearings. This has a special ventilation system, which prevents the creation of negative pressure due to temperature fluctuations in the hub. As a result, no water is sucked through the ball bearings, which ensures a significantly longer service life and noticeably easier running of the bearings.
Thanks to high-precision manufacturing and perfect quality control, the hubs of the second generation manage without the previously used adjuster for the bearing play. This means that you always have a perfectly adjusted hub with a smooth, easy run.
The unique freewheel mechanism with bevel teeth of the NONPLUS hubs has approx. 400% more contact surface than conventional systems and enables maximum power transmission with minimal wear. The forces are transmitted over a large area instead of selectively. The 45 defined rest points immediately convert your start into propulsion without much idle travel.

ENVE carbon rims are developed by ENVE in the USA and manufactured in compliance with the highest quality requirements at the company's headquarters in Utah. The engineers at ENVE have many years of experience with the use of carbon in the field of cycling and know what requirements a top product like these carbon rims must meet. At ENVE everything is done to use the advantages of carbon and to eliminate its disadvantages. So stiff and extremely light rims were developed in which all fibers can run without interruption, which corresponds to the best possible use of the material thickness. This principle has been perfected with the spoke holes, in that continuous fiber strands form the mount for the spoke nipples. Aluminum inserts, as are common with other carbon rims, can therefore be dispensed with during production. This reduces the weight and at the same time allows significantly higher spoke tensions which in turn allow the construction of stiffer wheels.

Wheel construction at R2-Bike

Our wheels are completely assembled by hand by our wheel builders. During the entire construction process, it is important that not only the concentricity is correct, but also that the spoke tension is as even as possible. The special care allows us to give a lifelong guarantee against broken spokes, as long as this was not caused by force!

You will also receive the following services for our balance bikes:

A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths so that the wheel can be repaired at short notice even after an accident.
A free initial inspection of the impeller, during which the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge the material!

Technical specifications:

intended use : Trail TR, All Mountain AM to Enduro EN
Impeller size: 29 "(ETRTO: 622 x see detailed description)
Rim type: Clincher (wire and folding tires)
Brake type: disc brake
Brake disc mount: 6-hole


1376g (lightest variant: Boost + Boost, M630, 28 holes, Sapim CX-Ray)
2061g (heaviest variant: Boost + Superboost Boost, M930, 32 holes, Sapim Race)

Due to manufacturing fluctuations for all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals / rim stickers.

The specified delivery time refers to the usual duration for the assembly of the wheelset and does not reflect the availability of the individual parts.

If you would like a special spoke on the rear wheel, e.g. for the Cannondale Ai rear triangle or for EVO6, please contact our service team.

Scope of delivery:

1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
2x ENVE tubeless kit (already assembled on request)
1x wheel bag
4x spare spokes including nipples
1x construction certificate
2x hologram sticker

matching products:
MAXXIS Tire Minion DHR II 29 x 2,40 WT 3C MaxxGrip TR EXO
available from stock

MAXXIS Tire Minion DHR II 29 x 2,40 WT 3C MaxxGrip TR EXO

Special price 55,00 € *
  • MSRP: 74,90 €
  • Item no.: 40705
  • Weight: 994g
NOTUBES tire sealant 473 ml (16oz) NOTUBES tire sealant 473 ml (16oz)
in 1 - 3 days

NOTUBES tire sealant 473 ml (16oz)

14,50 € *
30,66 € per 1 l
  • MSRP: 19,95 €
  • Item no.: 42
  • Weight: 532g
TUNE ONE SHOT Sealant | 1000 ml TUNE ONE SHOT Sealant | 1000 ml
in about 3 - 4 Weeks

TUNE ONE SHOT Sealant | 1000 ml

34,50 € *
34,50 € per 1 l
  • MSRP: 41,60 €
  • Item no.: 18829
  • Weight: 1173g