shipping country:
  • Premium Shipping with DHL
  • 100 days return policy

Wheelset 29" TR AM EN | Industry Nine MTB Center Lock Hubs | Syntace Aluminum Rims

Item number:
Product weight:
1765 g

from 1.197,50 €
Finanzieren ab 24.7 EUR / Monat
Mehr Informationen zum Ratenkauf
MSRP: 1.297,68 €
You save 7,72%, that is 100,18 €

including 19% VAT. , free shipping in DE / shipping time info (Sperrgut)

in about 1 - 2 weeks

Industry Nine Front Hub J-Bend Center Lock
Industry Nine Front Hub J-Bend Center Lock
  • Brake disc mount: Center Lock 
    Spoke type: J-Bend (curved)
    Storage: 2x industrial deep groove ball bearings
    Color: Black
    Weight: 138g

    With the 110 millimeter wide BOOST hub, stiffer wheels with a more even spoke angle can be built on both sides thanks to a wider flange spacing.
Industry Nine Rear Hub J-Bend Center Lock
Industry Nine Rear Hub J-Bend Center Lock
  • Brake disc mount: Center Lock
    Spoke type: J-Bend (curved)
    Storage: 4x industrial ball bearings
    Freewheel type: 6 pawls, 115 grids
    Freewheel compatibility: 12-speed Shimano Micro Spline 
    Color: Black
    Weight: 286g

    With the 148 millimeter wide BOOST hub, stiffer wheels with a more even spoke angle can be built on both sides thanks to a wider flange spacing.
Syntace Rims Trail - All Mountain - Enduro
Syntace Rims Trail - All Mountain - Enduro
  • Area of ??application: All Mountain AM, Enduro EN
    ETRTO: 622x40
    Inside width: 40 mm
    Outside width: 44 mm
    Rim height: 22 mm
    Offset: no
    recommended tire width: 2.5 "- 3.0"
    maximum tire pressure: N / A
    maximum system weight: 110 kg (driver, bike, clothing and possibly luggage)
    Color / finish: black / matt
    Weight: 610g
  • The wing spoke made of cold drawn Sweden steel has an elliptical shape which takes advantage of the flat, light and aerodynamically more favorable but weak aero spoke and the stronger but less aerodynamic and heavy classic round spoke. This gives it the diameter necessary for torque transmission and at the same time favorable and superior aerodynamic properties with low weight!
    Weight incl.nipple: approx.5.45g (1 piece)
Rim Tape | Tubeless Kit
Rim Tape | Tubeless Kit
Your configuration
Product details


Wheelset 29 "TR AM EN | Industry Nine MTB Center Lock hubs | Syntace aluminum rims

intended use : Trail TR, All Mountain AM to Enduro EN

With this wheelset you can really get it going even in difficult terrain. The indestructible Industry Nine hubs and the extremely stable Syntace rims also forgive a driving mistake. The balanced selection of components guarantees high reliability and a long service life.

The Industry Nine Hydra Classic hubs are a real gem on every bike. Developed and produced in Asheville, North Carolina, they favorably set themselves apart from the competition with many small technical refinements. With their externally sealed bearing and stable axle , they are optimally protected against environmental influences and are also ideally equipped for downhill use. Tapered spoke flanges help to reduce the forces on the sensitive spoke heads and thus prevent spoke breaks.
However, the pawl freewheel on the rear wheel hub is revolutionary. It consists of a drive ring with 115 teeth and 6 staggered pawls. These are designed so that as soon as one of them has a frictional connection, the others can also absorb torques shortly afterwards. This means that a single jack only has the power to carry it for a very short time. The big plus of this system is an extremely short free travel with 0.52 °, which brings clear advantages in technical passages or when hard starts. In addition, the fine grid leads to a unique soundscape on the impeller.
The maintenance effort is also relatively low. You can disassemble and clean the hub without tools.

In the past, narrow rims and heavy tires were the norm. Today, however, wide rims can be combined with new, light types of tires. But really wide, high-quality rims were inevitably still a bit heavier than their narrow brothers, otherwise the durability suffered. Syntace was the first to break this vicious circle in 2011. The original Syntace rim W33 was the first such wide and light aluminum rim on the market. After more than 5 years of experience, they have improved them with an even better aluminum alloy and with a profile that has been further developed in many test bench runs. And still made 50 g lighter.
Much more crack-resistant spoke anchoring in the rim base thanks to the SmoothFit profile and perfectly angular embedding of the nipples in the rim bed ensure a long-lasting construction without increasing the weight with additional washers.
The V-shape profile with the outward-facing and reinforced rim flanges reliably holds the tire on the rim and is extremely stable.

Wheel construction at R2-Bike

Our wheels are completely assembled by hand by our wheel builders. During the entire construction, it is important that not only the concentricity is correct, but also that the spoke tension is as even as possible. The special care allows us to give a lifelong guarantee against broken spokes, as long as this has not been caused by violence!

You will also receive the following services for our wheels:

A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths in order to be able to repair the wheel at short notice even after accidents.
A free initial inspection of the wheel, in which the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant 100% discount on all labor costs and only charge the material!

Technical specifications:

intended use : Trail TR, All Mountain AM to Enduro EN
Wheel size: 29 "(ETRTO: 622 x see detailed description)
Rim type: clincher (clincher and folding tire)
Brake type: disc brake
Brake disc mount: Center Lock


1765g (lightest variant: Boost + Boost Shimano Micro Spline, W28i, Sapim CX-Ray)
2033g (heaviest variant: Boost + Boost Shimano Micro Spline, W40i, Sapim Race)

Variations in weight are possible due to manufacturing fluctuations in all components. The information is usually determined without rim tape, valves and decals / rim stickers.

The specified delivery time refers to the usual duration for the assembly of the wheelset and does not reflect the availability of the individual parts.

Should you require special spokes on the rear wheel, e.g. for the Cannondale Ai rear triangle or for EVO6, please contact our service team.

Scope of delivery:

1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x construction certificate
2x hologram stickers