Wheelset 29 "Novatec Hubs | NoTubes ZTR rims MK3 | Sapim CX-Ray | XC MA With the MK3 Notubes brings a further development of their legendary Crest rim on the market. Despite a by 2 millimeters enlarged inner width Americans were able to save 20 grams of weight to the rim and at the same time increase the stiffness. Made possible by the inspired by the Valor carbon rims new rim design. With the increased size of 23 mm inner width of the tire increases in volume and is located at low air pressure stable on the rim. After Notubes Wide Right system the width of Crest MK3 has been optimized for 2.0 inch to 25.2 inch tires. For previous version remained the same over the years is the refined Bead Socket Technology and the superior characteristics Tubeless. An extra light rim, the tire can develop fully and the tire volume increases compared to a conventional rim. This leads to a lower rolling resistance and better damping characteristics.
intended use of the wheelset: Cross Country / Marathon
Novatec manufactures lightweight and rugged hub with a large range of intended uses. From cross country to enduro the endurance runner provided uncomplainingly their service. In many cases, the best parts are also fitted with wheels even in the high-end segment. Novatec always uses high quality Japanese ball bearings which ensure a peaceful and lasting smooth running with the established wheels.
Novatec Superlight 3 in 1 D771SB front
Lightweight and inexpensive front hub. The hub offers, Novatec typically, by a simple appearance, high rigidity values, light weight and ease of maintenance. The excellent running properties are realized by two high-quality, double sealed ball bearings Japanese. In addition, it is available in different axle variants, anytime convertible. (Quick release, 15x100 mm thru-axle)
Novatec Superlight 4 in 1 D772SB rear
Lightweight and inexpensive rear hub with wide range of use of MTB, Cyclocross to bike with disc brakes. Four high-quality, double sealed Japanese ball bearings ensure smooth running and long life. The freewheel body is compatible with 8 to 11-speed Shimano cassette. Thanks to optionally available freewheel body for SRAM XD 11-speed cassette (XX1, X01, X1) is an optimal adjustment possible here.
In addition, it is available in different axle variants, anytime convertible (quick release, 12x142 mm thru-axle X-12, E-Thru or Maxle 142).
The rims of Notubes are probably the most commonly installed when a spitzenklassiger wheelset is requested with lightweight aluminum rim. The rim profile is optimized such that this wheel takes out a proper stiffness from very little material. In addition, the rim Tubeless ready! This means that normal tires can be driven without tube. For this, the rim must only me provided Tubelesstape and the tires are mounted with some sealing milk. By omitting the tube the friction between tire and inner tube and the flexing of the tube is completely eliminated. As a result, the rolling resistance is reduced while simultaneously increasing comfort and grip!
NoTubes ZTR Crest MK3
intended use: Cross Country, Marathon
recommended weight limit including clothing. 85 Kg (32/32 Hole)
NoTubes Arch MK3 The ZTR Arch MK3 was developed with the input of the Enduro World Series teams. Despite an increase by 5 millimeters tremendous inner width compared to Arch EX, the Americans were even able to reduce the weight of the MK3 minimal and at the same time increase the stiffness. By enlarged to 26 millimeters inside width of the tire increases in volume and is located at low air pressure stable on the rim. After Notubes Wide Right system the width of the Arch has been optimized for MK3 2:25 inch to 2.5 inch tires. Compared to the ZTR Crest Arch EX heavier drivers provides more stiffness and reserves in borderline situations.
intended use: Cross Country Marathon
recommended weight limit including clothing. 95 Kg (32/32 Hole)
Sapim CX-Ray spokes are called spokes. The middle part is butted during production to 1.5 mm in diameter and forged flat in the last step. These processes ensure a strengthening of the structure and bring forth extremely durable spokes.
Wheel building at R2-Bike
Our wheels are assembled by our farmers impeller entirely by hand. While the entire structure is considered important that not only the concentricity true, but also that the spoke tension is as uniform as possible. The special care allows us to give a lifetime guarantee against spoke breakage as long as this was not caused by force!
Furthermore, you get to our impellers following services:
- A universal wheel bag for all standard sizes.
- An extra spoke nipples + to be able to repair the wheel shortly in all required spoke lengths even after accidents.
- A free initial inspection of the impeller, with the resulting work is completely free! There are only shipping.
- A Crash Replacement promise. If you have a wheel damage due to force majeure, we build your wheel on once again. We provide 100% discount on all labor costs and only charge the material!
Wheel Size inches: 29 "
Wheel Size ETRTO: 622 mm
Wheels Type: Clincher (folding and clincher)
Internal width rim: 23 mm (Crest), 26 mm (Arch)
Spokes Color: black
1516g (Novatec Superlight front + rear Superlight, ZTR Crest MK3, 32/32)
1590g (Novatec Superlight QR15 front + Superlight 12x142 mm rear, XD, ZTR Crest MK3, 32/32)
1688g (Novatec Superlight front + rear Superlight, ZTR Arch MK3, 32/32)
1762g (Novatec Superlight QR15 front + Superlight 12x142 mm rear, XD, ZTR Arch MK3, 32/32)
Note: Due to production tolerances for all components, are deviations
possible the weight. The details are usually without rim tape, valve and
Decals / Wheel Sticker determined.
Delivery: 1x complete wheelset, assembled (hub, rim, spokes and nipples)
4x spare spokes including nipple
1x construction certificate
2x hologram stickers