Wheelset 29 "DT Swiss hubs | Duke Lucky Jack carbon rims | Sapim CX-Ray | XC MA
intended use of the wheelset: Cross Country / Marathon
Hubs DT Swiss enjoy to be virtually indestructible reputation. And not without reason. Thanks to high quality bearings made of stainless steel and effective seals DT Swiss hubs are actually significantly more resistant than most competitors in the market.
DT Swiss 350 front
The entry into the world of DT Swiss hubs. The 350 hubs are designed to be extremely user-friendly, so no play must be set and the maintenance intervals are needed, if at all, only at long intervals. If, after tens of thousands of kilometers it out a service be necessary, the hubs can be thanks to the DT Swiss plug system dismantled and serviced within minutes without special tools. The years-proven flange geometry forms the perfect basis for durable and rigid wheels.
Available with 5x100 mm quick release, 15x100 mm thru-axle, 15x110 mm BOOST Standard and 20x110 mm thru-axle. Furthermore, there is a choice of 6-hole (IS2000) and Centerlock disc mount.
DT Swiss 240S front
The 240S hubs are the perennial favorites in the DT Swiss program. Yet lightweight robust and durable form in the long period the core of a rigid wheel. Unlike the 350s hubs easy rolling stainless steel bearings are installed here. The hub body is also more weight-reduced, but not at the expense of durability.
Available with 5x100 mm quick release, 15x100 mm thru-axle and 20x110 mm thru-axle. Furthermore, there is a choice of 6-hole (IS2000) and Centerlock disc mount.
DT Swiss 240S Lefty
Also for the exotic Lefty provides DT Swiss on a version of the 240s hub. Perfect for riders looking for a lightweight DT Swiss hub for their bike with Lefty fork.
Compatible with all Lefty Lefty and hybrid, for Lefty 2.0 and Lefty SuperMax is an optional adapter for the brake mounting required.
DT Swiss 180 Carbon Ceramic front
The high-end hub in DT Swiss program. Although it is lightweight, it does not shy away even the toughest intended uses. Equipped with Ceramic bearings and through the use of carbon, this hub is not only extremely light but also durable. So has thus ideal conditions for a very lightweight and sturdy wheel.
Available with 5x100 mm quick release or 15x100 mm thru-axle and the proven Centerlock disc mount.
DT Swiss 350 rear
The tried-and-toothed with 18 teeth toothed disc freewheel is the hallmark of DT Swiss rear hub, extremely reliable and can stand comparison to Swiss movement hardly shy. The bearing technology with 2 bearings for freewheel and hub body is adapted to the loads that occur. For a long life sealing system ensures the labyrinth together with grinding discs and executed sealing bearing rings made of steel. If, after tens of thousands of kilometers it out a service be necessary, the hubs can be thanks to the DT Swiss plug system dismantled and serviced within minutes without special tools.
Available with 5x135 mm quick release, 12x142 mm thru-axle, 12x148 mm BOOST Standard and Shimano 9/10/11-speed SRAM or XD 11-speed freewheel. Furthermore, there is a choice of 6-hole (IS2000) and Centerlock disc mount.
DT Swiss 240S rear
The 240S hubs are the perennial favorites in the DT Swiss program. Yet lightweight robust and durable form in the long period the core of a rigid wheel. Unlike the 350s hubs easy rolling stainless steel bearings are installed here. The hub body is also more weight-reduced, but not at the expense of durability. The 240 is of course also equipped with the legendary toothed disc freewheel.
Available with 5x135 mm quick release, 12x142 mm thru-axle and Shimano 9/10/11-speed SRAM or XD 11-speed freewheel. Furthermore, there is a choice of 6-hole (IS2000) and Centerlock disc mount.
DT Swiss 180 Carbon Ceramic rear
Following the motto never change a running system DT Swiss has its high-end only slightly revised hub of 180 series. Same is the minimalist weight with extremely high stiffness, which is achieved by a central part of unidirectional carbon on the hub body. The stiffness at the hub body is used, the load on the spokes evenly distribute. Driving and braking forces are transmitted better from both Speichenflanschen on all spokes. Unilateral load peaks are prevented what hub, spokes and rim saves.
DT Swiss hubs stand for easiest installation and highest reliability. The latter is achieved with the 180 hub with smooth, durable hybrid ceramic bearings and the indestructible ratchet drive mechanism. With 18 detents per revolution this not only ensures a very direct load path, but also for the typical, robust sound of DT Swiss hubs.
Available with 5x135 mm quick release, 12x142 mm thru-axle, and Shimano 9/10/11-speed SRAM or XD 11-speed freewheel and the proven Centerlock disc mount.
DUKE Lucky Jack Carbon
The Lucky Jack by DUKE is a very light and broad rim for cross country and marathon use.
Weighing 330g the weight is surprisingly low. Great value have the dimensions of the rim. With 31 mm outside and 24.8 mm inside the rim provides not only an excellent lateral stiffness, but also the tire optimum support width. Also at low air pressure, the driver (in) no spongy driving feel, as the tires can snap off bad side. Grip and comfort of the tire increase remarkably! Of course, the rim can be driven with sealing Tubeless milk.
The rims are veresehen with an asymmetrical rim profile, which requires a more uniform pitch angle of the spokes. This optimization of the spoke angle brings a number of advantages. The spoke tension on both sides can be better matched to one another, what is the shelf life of the spokes and the entire impeller conducive. The normally directional lateral stiffness is also adjusted so that the wheel appear rigid in itself.intended use: Cross Country, Marathon
recommended weight limit including clothing. 85 Kg (28/28 Hole) 95 Kg (32/32 Hole)
Sapim CX-Ray spokes are called spokes. The middle part is butted during production to 1.5 mm in diameter and forged flat in the last step. These processes ensure a strengthening of the structure and bring forth extremely durable spokes.
Wheel building at R2-Bike
Our wheels are assembled by our farmers impeller entirely by hand. While the entire structure is considered important that not only the concentricity true, but also that the spoke tension is as uniform as possible. The special care allows us to give a lifetime guarantee against spoke breakage as long as this was not caused by force!
Furthermore, you get to our impellers following services:
- A universal wheel bag for all standard sizes.
- An extra spoke nipples + to be able to repair the wheel shortly in all required spoke lengths even after accidents.
- A free initial inspection of the impeller, with the resulting work is completely free! There are only shipping.
- A Crash Replacement promise. If you have a wheel damage due to force majeure, we build your wheel on once again. We provide 100% discount on all labor costs and only charge the material!
Wheel Size inches: 29 "
Wheel Size ETRTO: 622 mm
Material: 3K Carbon
Wheels Type: Clincher (folding and clincher)
Internal width rim: 24.8 mm
Spokes Color: black
1298g (DT Swiss 180 CC | QR 5 mm + DT Swiss 180 CC | QR 5x135 mm, Lucky Jack, 32/32)
1286g (DT Swiss 180 CC | QR 15 + DT Swiss 180 CC | 12x142 mm, Lucky Jack, 32/32)
1360g (DT Swiss 240S | QR 5x100 mm + DT Swiss 240S | QR 5x135 mm, Lucky Jack, 32/32)
1393g (DT Swiss 240S | QR 15 + DT Swiss 240S | 12x142 mm, Lucky Jack, 32/32)
1354g (DT Swiss 240S | Lefty + DT Swiss 240S | QR 5x135 mm, Lucky Jack, 32/32)
1463g (DT Swiss 350 | QR 5x100 mm + DT Swiss 350 | QR 5x135 mm, Lucky Jack, 32/32)
1400g (DT Swiss 350 | BOOST + DT Swiss 350 | 12x148 mm BOOST, Lucky Jack, 32/32)
Note: Due to production tolerances for all components, are deviations
possible the weight. The details are usually without rim tape, valve and
Decals / Wheel Sticker determined.
Delivery: 1x complete wheelset, assembled (hub, rim, spokes and nipples)
4x spare spokes including nipple
1x construction certificate
2x hologram stickers
quick start Guide
quick start Guide
DT 180 CC
DE / EN
DE / EN
DE / EN
Notify me when this product is available
Other customers have also bought the following items