Description
Wheelset 29 "AM | Industry Nine MTB 6-hole hubs | Duke carbon rims
intended use : All Mountain AM to Enduro EN
With this wheelset, even racers can really let it go. The indestructible Industry Nine hubs and the superbly processed Duke rims forgive driving mistakes. The balanced selection of components guarantees you a high level of reliability and a long service life.
Hubs
The Industry Nine Hydra Classic hubs are a real gem on every bike. Developed and produced in Asheville / North Carolina, they set themselves apart from the competition with many small technical refinements. With their externally sealed bearing and stable axle , they are optimally protected against environmental influences and also ideally equipped for downhill use. Beveled spoke flanges help to reduce the forces on the sensitive spoke heads and thus prevent spoke breaks.
However, the pawl freewheel on the rear wheel hub is revolutionary. It consists of a drive ring with 115 teeth and 6 staggered pawls. These are designed so that as soon as one of them has a frictional connection, the others can also absorb torque shortly thereafter. This means that a single handle can only carry the power for a very short time. The big plus of this system is an extremely short free travel of 0.52 °, which brings clear advantages in technical passages or when accelerating hard. In addition, the fine grid leads to a unique background noise on the impeller.
The maintenance effort is also relatively low. You can disassemble and clean the hub without tools.
rims
The rims from Duke from France stand for low weight and excellent workmanship. The hookless construction is ideal for the use of tubeless systems. The reinforced bead makes it easier to cope with any punctures without causing damage. The fairly flat and wide rims reliably support the tire in every situation, so you don't have a spongy driving experience even with little air pressure.
The asymmetrical shape enables a more even spoke tension, which further increases the rigidity of the entire wheel.
Wheel construction at R2-Bike
Our wheels are completely assembled by hand by our wheel builders. During the entire construction process, it is important that not only the concentricity is correct, but also that the spoke tension is as even as possible. The special care allows us to give a lifelong guarantee against broken spokes, as long as this was not caused by force!
You will also receive the following services for our balance bikes:
A universal impeller bag for all common sizes.
A spare spoke + nipple in all spoke lengths required to be able to repair the wheel at short notice even after an accident.
A free initial inspection of the impeller, during which the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge the material!
Technical specifications:
intended use : All Mountain AM to Enduro EN
Impeller size: 29 "(ETRTO: 622 x see detailed description)
Rim type: Clincher (wire and folding tires)
Brake type: disc brake
Brake disc mount: 6-hole
Weights:
1584g (lightest variant: Boost + Boost, Crazy Jack 6Ters, Sapim CX-Ray)
1859g (heaviest variant: Boost + Boost, Fury Jack 6Ters, Sapim Race)
A notice:
Due to manufacturing fluctuations for all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals / rim stickers.
The specified delivery time refers to the usual duration for the assembly of the wheelset and does not reflect the availability of the individual parts.
If you want a special spoke on the rear wheel, e.g. for the Cannondale Ai rear triangle or for the EVO6, please contact our service team.
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x construction certificate
2x hologram sticker
