Wheelset 28 "RR | DT Swiss 240 EXP Road Straightpull hubs | ENVE carbon rims
intended use : Racing bike RR, time trial
We also have wheels in our range for traditionalists with proven rim brakes. The combination of the noble ENVE carbon rims and DT Swiss hubs should always be on the shortlist. The balanced selection of components guarantees you a high level of reliability and a long service life.
Lighter, stiffer, more precise and easier to maintain - these are the strengths of the newly launched DT Swiss 240 hubs. These properties were achieved through the Ratchet EXP technology. With this, the hubs not only get by with fewer components and the associated lower weight and lower wear, it also allows the bearing to be positioned significantly further out on the drive side. The greater distance between the bearings results in a higher stiffness of the hub, a lower bearing load and thus a higher durability. The stiffness of the hub body serves to distribute the load on the spokes more evenly. Driving and braking forces are transmitted even better from both spoke flanges to all spokes. One-sided load peaks are prevented, which protects the hub, spokes and rim. The super reliable toothed pulley freewheel system with its large contact area and 36 locking points ensures extremely direct and reliable power transmission.
ENVE carbon rims are developed by ENVE in the USA and manufactured in compliance with the highest quality requirements at its headquarters in Utah. The engineers at ENVE have many years of experience with the use of carbon in the field of cycling and know what requirements a top product like these carbon rims must meet. At ENVE everything is done to utilize the advantages of carbon and to eliminate its disadvantages. So stiff and extremely light rims were developed in which all fibers can run without interruption, which corresponds to the best possible use of the material thickness. This principle has been perfected for the spoke holes, as continuous fiber strands form the mount for the spoke nipples. Aluminum inserts, as are common with other carbon rims, can therefore be dispensed with during production. This reduces the weight and at the same time allows much higher spoke tensions which in turn allow the construction of stiffer wheels.
Wheel construction at R2-Bike
Our wheels are completely assembled by hand by our wheel builders. During the entire construction process, it is important that not only the concentricity is correct, but also that the spoke tension is as even as possible. The special care allows us to give a lifelong guarantee against broken spokes, as long as this was not caused by force!
You will also receive the following services for our balance bikes:
A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths to be able to repair the wheel at short notice even after an accident.
A free initial inspection of the impeller, during which the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge the material!
intended use : racing bike RR
Impeller size: 28 "(ETRTO: 622 x see detailed description)
Rim type: Clincher (wire and folding tires)
Brake type: rim brake
Brake disc mount: without
1332g (lightest variant: quick release + quick release, SRAM XDR, SES 2.2, 20/24, Sapim CX-Ray)
1697g (heaviest variant: quick release + quick release, Shimano / SRAM Road, SES 7.8, 20/24, Sapim Race)
Due to manufacturing fluctuations in all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals / rim stickers.
The specified delivery time refers to the usual duration for the assembly of the wheelset and does not reflect the availability of the individual parts.
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
2x ENVE tubeless kit (already mounted on request)
1x wheel bag
4x spare spokes including nipples
1x construction certificate
2x hologram sticker