Wheelset 28 "Disc RR | Newmen Road Straightpull Center Lock hubs | DT Swiss aluminum rims
intended use : road bike RR, Gravel GRV
Road cyclists are always looking for the best compromise between weight, aerodynamics and rigidity. The combination of DT Swiss aluminum rims and the indestructible Newmen hubs should therefore always be shortlisted. The balanced selection of components guarantees high reliability and a long service life.
Hubs
The Newmen FADE hubs will again find many fans. You don't have to worry about adjusting the axial bearing clearance here either. The durable, double-sealed industrial bearings are tension-free and precisely pressed in ex works. This further development has gained a high degree of user friendliness. You can spend the saved time better on your favorite trail.
The design of the freewheel is completely different from the previous model. The goal was low noise. The FADE pawl system came out. 3 pawls engage in a new type of tooth profile. To increase durability, the diameter was increased and the individual pawls were made short and wide. The resulting forces are thus distributed over a large area.
Despite the relatively low weight, safety was not spared. It is better to use a little more material in critical areas, such as. For example, at the transition between the brake disc and spoke holder, as a risk of a defect.
rims
DT Swiss has stood for innovative products of the highest quality for years. Starting as a manufacturer of high quality spokes, the company has continuously expanded its product range. Since 2004, the Swiss have also had rims in their range, which they are constantly improving through the feedback of cycling professionals and taking into account new developments in the material and manufacturing area. Today DT Swiss rims are among the most driven on the market.
Thanks to extensive FEM analyzes, the aluminum rims only contain as much material as is absolutely necessary at every point. They are connected by the SBWT® welding process. The rim is stabilized with a block during welding and then CNC machined to guarantee a seamless transition.
Wheel construction at R2-Bike
Our wheels are completely assembled by hand by our wheel builders. During the entire construction, it is important that not only the concentricity is correct, but also that the spoke tension is as even as possible. The special care allows us to give a lifelong guarantee against broken spokes, as long as this has not been caused by violence!
You will also receive the following services for our wheels:
A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths in order to be able to repair the wheel at short notice even after accidents.
A free initial inspection of the wheel, in which the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant 100% discount on all labor costs and only charge the material!
Technical specifications:
intended use : road bike RR, Gravel GRV
Wheel size: 28 "(ETRTO: 622 x see detailed description)
Rim type: clincher (clincher and folding tire)
Brake type: disc brake
Brake disc mount: Center Lock
Weights:
1379g (lightest variant: 12x100 mm + 12x142 mm, RR 411 DB, 24 hole, Sapim CX-Ray)
1726g (heaviest variant: 12x100 mm + 12x142 mm, RR 521 DB, 28 holes, Sapim Race)
Note:
Due to production fluctuations in all components, weight deviations are possible. The information is usually determined without rim tape, valves and decals / rim stickers.
The specified delivery time refers to the usual duration for the assembly of the wheelset and does not reflect the availability of the individual parts.
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x construction certificate
2x hologram stickers