Wheelset 28" Disc RR | Extralite Road Straightpull 6-Hole Hubs | DT Swiss Aluminium Rims

Brake disc mount: 6-hole
Spoke Type: Straightpull
Storage: 4x industrial deep groove ball bearings
Freewheel type: spur gear, 48 pitches
Freewheel compatibility: 11-, 12-speed Road Shimano/SRAM, 10-speed only with spacer
Color: Black
Weight: 147g

Brake disc mount: 6-hole
Spoke Type: Straightpull
Storage: 4x industrial deep groove ball bearings
Freewheel type: spur gear, 48 pitches
Freehub compatibility: 12-speed SRAM XDR, SRAM XD only with optional spacers
Color: Black
Weight: 147g

Area of ??application: Road RR, Gravel GRV
ETRTO: 622x20
Inside width: 20 mm
Outer width: 24 mm
Rim height: 23 mm
Offset: no
recommended tire width: 25 - 64 mm (ideally 28 - 34 mm)
maximum tire pressure: 8.5 bar
maximum system weight: 120 kg (driver, bike, clothing and possibly luggage)
Color / finish: black matt
Weight: 450g

Area of ??application: Road RR, Gravel GRV
ETRTO: 622x22
Inner width: 22 mm
Outer width: 25 mm
Rim height: 23 mm
Offset: no
recommended tire width: & nbsp; 30 - 69 mm (ideal & nbsp; 32 - & nbsp; 50 mm)
maximum tire pressure: 7.2 bar
maximum system weight: 130 kg (driver, bike, clothing and possibly luggage)
Color / finish: black matt
Weight: 495g

Area of ??application: Road RR, Gravel GRV
ETRTO: 622x20
Inner width: 20 mm
Outside width: 24 mm
Rim height: 32 mm
Offset: no
recommended tire width: 25 - 64 mm (ideally 28 - 34 mm)
maximum tire pressure: 8.5 bar
maximum system weight: 130 kg (driver, bike, clothing and possibly luggage)
Color / finish: black matt
Weight: 520g

Area of ??application: Road RR, Gravel GRV
ETRTO: 622x22
Inner width: 22 mm
Outside width: 26 mm
Rim height: 25 mm
Offset: no recommended tire width: 30 - 69 mm (ideal 32 - 50 mm)
maximum tire pressure: 7.2 bar
maximum system weight: 130 kg (driver, bike, clothing and possibly luggage)
Color / finish: black matt
Weight: 485g

Area of ??application: Road RR, Gravel GRV
ETRTO: 622x18
Inside width: 18 mm
Outside width: 22 mm
Rim height: 21 mm
Offset: yes
recommended tire width: 23 - 56 mm (ideally 25 - 30 mm)
maximum tire pressure: 9 bar
maximum system weight: 120 kg (driver, bike, clothing and possibly luggage)
Color / finish: black matt
Weight: 410g

The asymmetrical design ensures a more even spoke tension when building the wheel and improves the durability of the Wheel.

Area of ??application: Road RR
ETRTO: 622x20
Inner width: 20 mm
Outside width: 24 mm
Rim height: 21 mm
Offset: yes
recommended tire width: 25 - 64 mm (ideally 28 - 34 mm)
maximum tire pressure: 8.5 bar
maximum system weight: 120 kg (driver, bike, clothing and possibly luggage)
Color / finish: black matt
Weight: 430g
 

The asymmetrical design ensures a more even spoke tension when building the wheel and improves the durability of the Wheel.

Intended use: Cross Country, Trail, All Mountain, Gravel,BMX
Weight including nipple: approx. 5.95g (1 piece)

Sapim places the D-Light between the Laser and the Race. It's not quite as light as the former, but it's almost as durable as the stable Race. This makes it interesting even for BMX riders. The tapered middle section is able to absorb even high peak loads, thereby minimizing the risk of breakage. At the same time, it is stiff enough to prevent unwanted torsion during wheel building, which simplifies the process and enables durable wheels. The sum of the properties makes the Sapim D-Light a universal spoke with which there are almost no limits.

Application: Cross Country, Trail, Gravel, Road
Weight incl. nipple: approx. 5.45g (1 piece)

With the CX-Ray, Sapim has succeeded in developing an extraordinary spoke. In addition to its low weight, it has exceptional resilience and flexibility. This also results in the large range of applications. It doesn't matter whether you are a racing cyclist or a mountain biker, everyone benefits from these positive characteristics. In addition, the flattened center section ensures excellent aerodynamics. The high material quality enables the construction of stable wheels and guarantees a long service life.

Application: Cross Country, Trail, Gravel, Road
Weight incl. nipple: approx. 5.45g (1 piece)

With the CX-Ray, Sapim has succeeded in developing an extraordinary spoke. In addition to its low weight, it has exceptional resilience and flexibility. This also results in the large range of applications. It doesn't matter whether you are a racing cyclist or a mountain biker, everyone benefits from these positive characteristics. In addition, the flattened center section ensures excellent aerodynamics. The high material quality enables the construction of stable wheels and guarantees a long service life.

Application: Cross Country, Trail, Gravel, Road
Weight incl. nipple: approx. 5.5g (1 piece)

The DT Swiss Aerolite has been the first choice of many wheel builders for building high-end wheelsets for years. With its middle section flattened to 0.9 millimeters, the Aerolite cuts particularly well through the air and helps you to save some watts at high speeds. In addition, it is the lightest flat spoke in the DT-Swiss range. The spoke is first butted to a thickness of 1.5 mm in a cold forging process and then flattened in a further process. This complex process further increases the strength and gives the Aerolite its high stability and durability. Thanks to these properties, the bladed spoke can be used on racing bikes or mountain bikes and fits into all hubs with standard bores.

Area of ​​use: MTB, Gravel
Weight including nipple: approx. 5.5g (1 piece)

The DT Swiss Revolite spoke combines low weight and durability. In the course of the development process, various variants were tested extensively until the final shape and choice of raw materials were determined. The result is a cross-shaped cross-section flattened on one side, which is considered the best compromise between the above properties. In addition, a special, patented cold forging process ensures that the material is compressed and thus also increases stability. Nevertheless, the spokes can also digest harder blows, which makes them particularly suitable for use on mountain bikes.

Area of ​​use: MTB, Gravel
Weight including nipple: approx. 5.5g (1 piece)

The DT Swiss Revolite spoke combines low weight and durability. In the course of the development process, various variants were tested extensively until the final shape and choice of raw materials were determined. The result is a cross-shaped cross-section flattened on one side, which is considered the best compromise between the above properties. In addition, a special, patented cold forging process ensures that the material is compressed and thus also increases stability. Nevertheless, the spokes can also digest harder blows, which makes them particularly suitable for use on mountain bikes.

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g

Use of high-quality SAPIM or DT Swiss spoke nipples made of aluminium with a total length of 14/15 mm. The head shape of SAPIM and DT Swiss spoke nipples allows the nipple to align itself better in the pulling direction of the spoke. For a beautiful look, the aluminium nipples are high-quality anodized to match your accent colour on the bike.

Weight per piece: 0,35g