Wheelset 28" Disc RR | DT Swiss 240 EXP Straightpull Center Lock hubs | Duke Baccara 36C SLR2 Ultra 24/24 Carbon rims | SRAM XDR | Sapim CX-Ray
Application: Road bike RR
Road cyclists are looking for the best compromise between weight, aerodynamics and stiffness. The combination of Duke Carbon rims and the indestructible DT Swiss 240 hubs should therefore always be on the shortlist. The balanced selection of components guarantees you high reliability and a long service life.
DT Swiss 240 EXP hubs
Lighter, stiffer, more precise and easier to maintain - these are the strengths of the new DT Swiss 240 hubs. These properties have been achieved thanks to the Ratchet EXP technology. This not only means that the hubs have fewer components and therefore lower weight and less wear, it also allows the bearing to be positioned much further out on the drive side. The greater distance between the bearings results in greater hub rigidity, lower bearing loads and therefore greater durability. The stiffness on the hub body serves to distribute the load more evenly on the spokes. Drive and braking forces are transmitted even better from both spoke flanges to all spokes. One-sided load peaks are prevented, which protects the hub, spokes and rim. The super reliable toothed pulley freehub system with its large contact surface and 36 engagement points ensures extremely direct and reliable power transmission.
Duke Baccara 36C SLR2 Ultra rims
Duke has pushed the limits with this rim. A sensational 295 g on the scales with a rim height of 36 mm is unrivaled. Nevertheless, safety has not been spared, as it is approved for a system weight of 95 kg.
Based on the already very light SLR2 rims, the French succeeded in reducing the weight by more than 10%. Material was only saved in non-critical areas. The durability and stability are convincing. Together with the high profile, this guarantees you a stiff wheel and excellent aerodynamics. Nevertheless, comfort is not neglected. The special arrangement of the carbon layers is able to soften the peaks of impacts from the ground. This prevents premature signs of fatigue in the arms and hands.
The unique finish is achieved using SLR2 manufacturing technology. No reworking or painting is necessary after the manufacturing process and the special look is retained.
The rims have an asymmetrical rim profile, which enables a more even spoke angle. This optimization of the spoke angle has a number of advantages. The spoke tension on both sides can be better aligned, which is beneficial to the durability of the spokes and the wheel as a whole. The normally direction-dependent lateral stiffness is also adjusted, making the wheel stiffer in itself.
SAPIM CX-Ray spokes
With the CX-Ray, Sapim has succeeded in developing an exceptional spoke. In addition to its low weight, it has an exceptional load capacity and flexibility. This also results in a wide range of applications. Whether road cyclists or mountain bikers, everyone benefits from these positive characteristics. In addition, the flattened middle section ensures excellent aerodynamics. The high material quality enables the construction of stable wheels and guarantees a long service life.
Sapim's CX-Ray spokes can be installed in all standard hub holes.
Wheel construction at R2-Bike
Our wheels are assembled entirely by hand by our wheel builders. During the entire assembly process, great importance is attached to ensuring that not only the concentricity is correct, but also that the spoke tension is as even as possible. This special care allows us to offer a lifetime guarantee against spoke breakage, as long as it has not been caused by force.
You also receive the following services with our wheels:
A universal wheel bag for all common sizes.
A spare spoke + nipple in all required spoke lengths so that the wheel can be repaired at short notice even after accidents.
A free initial inspection of the wheel, where the resulting work is completely free of charge! Only shipping costs apply.
A Crash Replacement Promise: If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge for the material!
Technical data
Area of application: Road bike RR
Wheel size: 28"
Rim type: clincher and folding tires
Brake type: Disc brake
Brake pads: -
Rim material: Carbon
Inner width: 21 mm
Outer width: 27.6 mm
Rim height: 36 mm
Number of holes: front 24 / rear 24
Spokes: Sapim CX-Ray 2.0 | 0.9 - 2.2 | 2.0, black
Spoking pattern: front 2-crossed | rear 2-crossed
Axle standard front: 12x100 mm thru axle
Rear axle standard: 12x142 mm thru axle
Brake rotor mount: Center Lock
Front bearing: 2x industrial bearings
Rear bearing: 4x industrial bearings
Freehub compatibility: 12-speed SRAM XDR, 11-, 12-speed SRAM XD only with optional spacer
Freewheel type: Ratchet EXP, 2 toothed pulleys, 36 ratchet points
recommended tire width: 25-53 mm
max. air pressure: max. 7.5 bar (with 28 mm tire width)
maximum system weight: 95 kg (rider, bike, clothing and possibly luggage)
tubeless capable: yes
Valve hole: Presta valve (SV)
Color rim / finish: black / UD carbon satin finish
Color decor: white
Color hubs: black with white-red lettering
Weight according to manufacturer: 1147g (without valves and rim tape)
Weight self-weighed: 1134g (set), 522g (front wheel), 612g (rear wheel) - specification with valves and rim tape
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x assembly certificate
2x hologram stickers
2x tubeless valve (already fitted)
Tubeless rim tape (already mounted)
CONTINENTAL Tire Grand Prix 5000 S TR Tubeless 28" | 700 x 28C BlackChili VectranBreakeravailable from stock
DT SWISS Freehub Body Conversion Kit Light Ratchet EXP Shimano 11-speed Road | 12x142 mm Thru Axleavailable from stock
Wheelset 29" XC | NONPLUS Components 6-Hole Hubs | Porte Carbon Rimshandmade - in about 6 - 8 weeks
SRAM Brake Disc Centerline X two part Rounded Edges 160 mm | Center Lockin 3 - 5 days