Wheelset 28 "Disc RR | DT Swiss 240 EXP Road Straightpull Center Lock hubs | MCFK carbon rims
intended use : racing bike RR
Racing cyclists are looking for the best compromise between weight, aerodynamics and stiffness. The combination of MCFK carbon rims and indestructible DT Swiss hubs should therefore always be on the shortlist. The balanced selection of components guarantees you a high level of reliability and a long service life.
Lighter, stiffer, more precise and easier to maintain - these are the strengths of the newly launched DT Swiss 240 hubs. These properties were achieved through the Ratchet EXP technology. With this, not only do the hubs get by with fewer components and the associated lower weight and less wear, it also allows the bearing to be positioned significantly further out on the drive side. The greater distance between the bearings results in a higher stiffness of the hub, a lower bearing load and thus a higher durability. The stiffness of the hub body serves to distribute the load on the spokes more evenly. Driving and braking forces are transmitted even better from both spoke flanges to all spokes. One-sided load peaks are prevented, which protects the hub, spokes and rim. The super reliable toothed pulley freewheel system with its large contact area and 36 locking points ensures extremely direct and reliable power transmission.
This light, stable and beautifully finished carbon rim comes from the lightweight construction specialist in Leipzig. The hookless construction not only makes the assembly of the tires easier, it also guarantees a more stable rim flange, since the carbon fibers can be placed throughout. Laminated spoke holes instead of conventionally drilled holes ensure extra stability and additional durability. The asymmetrical structure of the rim enables a more even spoke tension, which increases the rigidity of a complete wheel again. With an enormous inside width, this rim offers enough space even for wide tires. The best conditions for a plus in comfort and optimal traction.
Wheel construction at R2-Bike
Our wheels are completely assembled by hand by our wheel builders. During the entire construction process, it is important that not only the concentricity is correct, but also that the spoke tension is as even as possible. The special care allows us to give a lifelong guarantee against broken spokes, as long as this was not caused by force!
You will also receive the following services for our balance bikes:
A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths to be able to repair the wheel at short notice even after an accident.
A free initial inspection of the impeller, during which the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge the material!
intended use : racing bike RR
Impeller size: 28 "(ETRTO: 622 x see detailed description)
Rim type: Clincher (wire and folding tires)
Brake type: disc brake
Brake disc mount: Center Lock
1247g (lightest variant: 12x100 mm + 12x142 mm, SRAM XDR, 25 mm 3K, Sapim CX-Ray)
1483g (heaviest variant: 12x100 mm + 12x142 mm, Shimano / SRAM Road, 45 mm UD, Sapim Race)
Due to manufacturing fluctuations in all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals / rim stickers.
The specified delivery time refers to the usual duration for the assembly of the wheelset and does not reflect the availability of the individual parts.
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x construction certificate
2x hologram sticker