Wheelset 28" Disc RR | DT Swiss 180 Road Straightpull Center Lock hubs | ENVE carbon rims
Area of intended use : Road bike RR, Gravel GRV
Road cyclists are looking for the best compromise between weight, aerodynamics and stiffness. The combination of ENVE carbon rims and DT Swiss 180 hubs should therefore always be shortlisted. The balanced selection of components guarantees you high reliability and a long service life.
hubs
Lighter, stiffer, more precise and easier to maintain - these are the strengths of the DT Swiss 180 hubs. The smooth-running SINC Ceramic ball bearings offer you another decisive advantage; they ensure minimum rolling resistance. The stiffness on the hub body serves to distribute the load more evenly on the spokes. Driving and braking forces are transmitted even better from both spoke flanges to all spokes. Unilateral peak loads are prevented, which protects the hub, spokes and rim. The RATCHET EXP ratchet freehub has also been further developed. The very reliable system ensures direct power transmission without losses.
The main advantages of straightpull hubs are, in addition to the more modern design, contact-free spokes that do not cause any unpleasant noise and spoke heads that cannot work into the spoke flange. If desired, the straightpull hubs can also be spoked crosswise.
rims
ENVE carbon rims are developed by ENVE in the USA and manufactured to the highest quality standards at the headquarters in Utah. The ENVE engineers have years of experience with the use of carbon in the field of cycling and know what requirements a top product like these carbon rims must meet. At ENVE, everything is done to use the advantages of carbon and eliminate its disadvantages. Stiff and extremely light rims were developed in which all fibers can run without interruption, which corresponds to the best possible utilization of the material strengths. This principle was perfected in the spoke holes, in which continuous fiber strands form the mount for the spoke nipples. Aluminum inserts, which are common with other carbon rims, can therefore be dispensed with during production. This reduces the weight and at the same time allows significantly higher spoke tensions, which in turn allow the construction of stiffer wheels.
Impeller construction at R2-Bike
Our wheels are assembled entirely by hand by our wheel builders. During the entire construction, it is important that not only the concentricity is right, but also that the spoke tension is as even as possible. The special care allows us to give a lifetime guarantee against broken spokes, as long as this is not caused by violence!
You will also receive the following services with our wheels:
A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths to be able to repair the impeller at short notice even after an accident.
A free initial check of the impeller, where the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge for the material!
Technical specifications:
Area of intended use : Road bike RR, Gravel GRV
Wheel size: 28" (ETRTO: 622 x see detailed description)
Rim Type: Clincher (clincher and folding)
Brake type: disc brake
Brake disc mount: Center Lock
weights:
1094g (lightest variant: 12x100 mm + 12x142 mm, SRAM XDR, SES 2.3, Sapim CX-Ray)
1652g (heaviest variant: 12x100 mm + 12x142 mm, Shimano/SRAM Road, SES 7.8, Sapim Race)
A notice:
Due to manufacturing variations in all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals/rim stickers.
The specified delivery time refers to the usual time it takes to assemble the wheelset and does not reflect the availability of the individual parts.
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
2x ENVE Tubeless Kit (already mounted on request)
1x wheel bag
4x spare spokes including nipples
1x assembly certificate
2x hologram stickers