Description
Wheelset 28 "Disc RR | Carbon-Ti Road Straightpull Center Lock hubs | DT Swiss aluminum rims
intended use : Racing bike RR, Gravel GRV
Racing cyclists are looking for the best compromise between weight, aerodynamics and stiffness. The combination of DT Swiss aluminum rims and carbon-Ti hubs should therefore always be on the shortlist. The balanced selection of components guarantees you a high level of reliability and a long service life.
Hubs
The bodies of the X-Hub SP hubs are elaborately CNC-milled and rotate around a multi-butted aluminum axis. With a diameter of 17 mm, this brings a good degree of rigidity to the hub. High-quality, double-sealed ball bearings are installed, which ensure a permanently silky smooth run. The axis play can easily be adjusted by hand from the outside. The new pre-load adjustment ring is now easier to operate.
The freewheel on the rear hub engages with four pawls, each with three teeth, in a 56-fold titanium tooth ring, in order to be able to withstand even performance-oriented riders.
The main advantages of the Straightpull hubs, in addition to the more modern design, are non-contact spokes that do not cause any unpleasant noises and spoke heads that cannot work into the spoke flange.
rims
DT Swiss has stood for innovative products of the highest quality for years. Starting out as a manufacturer of high-quality spokes, the company continuously expanded its product range. Since 2004, the Swiss have also had rims in their range, which they are constantly improving through feedback from professional cyclists and taking into account new developments in materials and manufacturing. Today DT Swiss rims are among the most driven on the market.
Thanks to extensive FEM analyzes, the aluminum rims only contain as much material as is absolutely necessary at each point. They are connected by the SBWT® welding process. The rim is stabilized with a block during welding and then CNC machined to guarantee a seamless transition.
Wheel construction at R2-Bike
Our wheels are completely assembled by hand by our wheel builders. During the entire construction process, it is important that not only the concentricity is correct, but also that the spoke tension is as even as possible. The special care allows us to give a lifelong guarantee against broken spokes, as long as this was not caused by force!
You will also receive the following services for our balance bikes:
A universal impeller bag for all common sizes.
A spare spoke + nipple in all spoke lengths required to be able to repair the wheel at short notice even after an accident.
A free initial inspection of the impeller, during which the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge the material!
Technical specifications:
intended use : Racing bike RR, Gravel GRV
Impeller size: 28 "(ETRTO: 622 x see detailed description)
Rim type: Clincher (wire and folding tires)
Brake type: disc brake
Brake disc mount: Center Lock
Weights:
1351g (lightest variant: 12x100 mm + 12x142 mm, RR 411 DB, Sapim CX-Ray)
1643g (heaviest variant: 12x100 mm + 12x142 mm, RR 521 DB, Sapim Race)
Note:
Due to manufacturing fluctuations for all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals / rim stickers.
The specified delivery time refers to the usual duration for the assembly of the wheelset and does not reflect the availability of the individual parts.
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x construction certificate
2x hologram sticker