header image

    Wheelset 28" DT Swiss Hubs | Carbon Rim U-shape Road Clincher | Sapim CX-Ray | RR CX

    Item no.:
    19846

    Product weight:1309g
    Manufacturer:
    r2-bike
    from 1.297,50 € UVP: 1.594,40 €
    including 19% VAT. , no shipping costs (Sperrgut)
    • ca. 1 - 2 weeks

    Configure

      including 19% VAT., no shipping costs (Sperrgut)

    DT Swiss Hub Road | Axle front*

    DT Swiss Hub Road | Axle rear*

    Freehub Body Road*

    Carbon Rim U-shape Road front*

    Carbon Rim U-shape Road rear*

    Finish Carbon Rims*

    Colour Aluminium Nipples*

    Rim Tape | Tubeless Kit*

    * Pflichtfeld

    Article details

    • Description

    • Notify me when this product is available

    Wheel set 28 "DT Swiss hubs | carbon rim U-shape Road Clincher | Sapim CX-Ray | RR CX

    hub

    Hubs DT Swiss enjoy to be virtually indestructible reputation. And not without reason. Thanks to high quality bearings made of stainless steel and effective seals DT Swiss hubs are actually significantly more resistant than most competitors in the market. Just unpack, install and forget in the bike.


    hubs forward

    DT Swiss 240S Disc front NON

    The 240S hubs are as easy to use design as the 350s, so no play must be set and the maintenance intervals are needed, if at all, only at long intervals. A weight optimization of the hub body and the use of easy-rolling stainless steel bearings are the ideal basis for lightweight, durable and stable wheels.


    DT Swiss 180 Carbon Ceramic NON Disc front

    Following the motto never change a running system DT Swiss has its high-end only slightly revised hub of 180 series. Same is the minimalist weight with extremely high stiffness, which is conceded by a central part of unidirectional carbon on the hub body. The stiffness at the hub body is used, the load on the spokes evenly distribute. Driving and braking forces are transmitted better from both Speichenflanschen on all spokes. Unilateral load peaks are prevented what hub, spokes and rim saves.

    DT Swiss hubs stand for easiest installation and highest reliability. The latter is achieved with the 180 hub with smooth, durable hybrid ceramic bearings. Through the use of expensive seals and the loads customized bearing sizes the hubs do not require adjusting the bearing clearance. So the driver has to worry about the function of the hub over the years!


    hub rear

    DT Swiss 240S Disc rear NON

    The 240S hubs are as easy to use design as the 350s, the proven toothed disc freewheel is extremely reliable and can stand comparison to Swiss movement hardly shy. The bearing technology with two stainless steel bearings for freewheel and hub body is adapted to the loads that occur. For a long life sealing system ensures the labyrinth together with grinding executed sealing washers.


    DT Swiss 180 Carbon Ceramic NON Disc rear

    Following the motto never change a running system DT Swiss has its high-end only slightly revised hub of 180 series. Same is the minimalist weight with extremely high stiffness, which is conceded by a central part of unidirectional carbon on the hub body. The stiffness at the hub body is used, the load on the spokes evenly distribute. Driving and braking forces are transmitted better from both Speichenflanschen on all spokes. Unilateral load peaks are prevented what hub, spokes and rim saves.


    DT Swiss hubs stand for easiest installation and highest reliability. The latter is achieved with the 180 hub with smooth, durable hybrid ceramic bearings and the indestructible ratchet drive mechanism with the DT Swiss typical robust sound. Through the use of expensive seals and the loads customized bearing sizes the hubs do not require adjusting the bearing clearance. So the driver has to worry about the function of the hub over the years!



    rims

    Lightweight, durable and beautifully processed carbon rims with exclusive, flawless carbon finish and super aerodynamic values, which is matte or glossy UD available in UD. With classic rim flanges rim for all wire and tire is suitable. Furthermore, the rim Tubeless Ready. With matching rim tape, tire and sealing milk the system can be operated without a tube. Due to the enormous width of 25 mm outside and a Felgeninnenmaß of 19 mm provides the rim opposite narrower counterparts an aerodynamic advantage. 23 and 25 mm wide tires provide an almost seamless transition from tire to rim. In addition, the U-shaped rim profile ensures good aerodynamic values and is less susceptible to crosswinds. In the basalt rim flange is incorporated. This ensures optimum braking in wet conditions. Due to the high stability - 25mm rim width, U-shape rim profile - allows the rim enormously rigid wheels, which make an excellent figure on bike and cyclo Crosser.


    CARBON rim 28 "| 700C Road 25 U-shape Clincher

    Lightweight and durable rim with good aerodynamic properties. Due to the low rotating mass perfect for mountain driving and quick sprints. Ideal for road or triathlon.

    intended use: Road, Triathlon
    recommended weight limit including clothing. 90 Kg (20/24 Hole), 100 kg (24/28 Hole)


    CARBON rim 28 "| 700C Road 35 U-shape Clincher

    Lightweight and durable wheel with improved aerodynamic properties. By optimizing the rim profile in U-shape can be saved on the track valuable power and a few seconds. Also ideal for use on cyclo Crosser.

    intended use: Road, Triathlon, Cyclocross
    recommended weight limit including clothing. 90 Kg (20/24 Hole), 100 kg (24/28 Hole)


    CARBON rim 28 "| 700C Road 55 U-shape Clincher

    Lightweight and durable rim with protruding ragenen aerodynamic properties. By optimizing the rim profile in U-shape can be saved on the track valuable power and a few seconds. Ideal for triathlon and time trials.

    intended use: Road, Triathlon, Cyclocross, ITT
    recommended weight limit including clothing. 90 Kg (20/24 Hole), 100 kg (24/28 Hole)


    spokes

    Sapim CX-Ray

    Sapim CX-Ray spokes are called spokes. The middle part is butted during production to 1.5 mm in diameter and forged flat in the last step. These processes ensure a strengthening of the structure and bring forth extremely durable spokes. The spokes are protected from the weather by a black surface treatment.


    Wheel building at R2-Bike

    Our wheels are assembled by our farmers impeller entirely by hand. While the entire structure is placed value that not only the concentricity true, but also that the spoke tension is as uniform as possible. The special care allows us to give a lifetime guarantee against spoke breakage as long as this was not caused by force!

    Furthermore, you get to our impellers following services:

    • A universal wheel bag for all standard sizes.
    • An extra spoke nipples + to be able to repair the wheel shortly in all required spoke lengths even after accidents.
    • A free initial inspection of the impeller, with the resulting work is completely free! There are only shipping.
    • A Crash Replacement promise. If you have a wheel damage due to force majeure, we build your wheel on once again. We provide 100% discount on all labor costs and only charge the material!


    Technical specifications:

    Wheel size inch 28 "
    Wheel Size ETRTO: 622 mm
    Wheels Type: Clincher (folding and clincher)
    Internal width rim: 19 mm
    Recommended tire sizes: 23 - 33 mm
    recommended pads: BBB Carbstop or Swissstop Black Prince
    Tyre pressures recommended: Road max. 8 bar, Cyclocross max. 4.5 bar
    Spokes Color: black

    weights:

    1339g (DT Swiss 240S Disc front + Non 240S Non Disc rear, Carbon Road 25, 20/24)
    1440g (DT Swiss 240S Disc front + Non 240S Non Disc rear, Carbon Road 35, 24/28)
    1459g (DT Swiss 240S Disc front + Non 240S Non Disc rear, Carbon Road 45, 20/24)
    1449g (DT Swiss 240S Disc front + Non 240S Non Disc rear, Carbon Road 35 | 55, 20/24)

    1309g (DT Swiss 180 CC Non Disc front + 180 CC Non Disc rear, Carbon Road 25, 20/24)
    1410 g (DT Swiss 180 CC Non Disc front + 180 CC Non Disc rear, Carbon Road 35, 24/28)
    1429g (DT Swiss 180 CC Non Disc front + 180 CC Non Disc rear, Carbon Road 45, 20/24)
    1479g (DT Swiss 180 CC Non Disc front + 180 CC Non Disc rear, Carbon Road 35 | 55, 20/24)


    Note: Due to production tolerances for all components are fluctuations
    possible the weight. The details are usually without rim tape, valve and
    Decals / Wheel Sticker determined.


    Delivery: 1x complete wheelset, assembled (hub, rim, spokes and nipples)
    1x Laufradtasche
    4x spare spokes including nipple
    1x construction certificate
    2x hologram stickers

    quick start Guide

    DT 240S

    DT 180 CC

    DE / EN

    DE / EN


    Product weight:1309g

    Request notification

    * Mandatory fields

    matching accessories

    Top