Wheelset 27,5" TR AM | Syntace MTB Straightpull 6-Hole Hubs | ENVE Carbon Rims

Brake disc mount: 6-hole
Spoke type: straight pull (straight)
Storage: 4x industrial deep groove ball bearings
Freewheel type: 2 tooth lock washers, 45 grids
Freewheel compatibility: 12-speed Shimano Micro Spline (steel freehub body)
Color: matte black
Weight: 318g

With the 148 millimeter wide BOOST hub, stiffer wheels with a more even spoke angle on both sides can be built thanks to a wider flange distance.
The steel freewheel body can also absorb high pedaling forces and is therefore also suitable for e-bikes. But it is also a little heavier than its aluminum counterpart.

Area of application: Trail TR, All Mountain AM
ETRTO: 584x35
Inside width: 35 mm
External width: 43.5 mm
Rim height: 26.5 mm
Offset: 0.0 mm (symmetrical)
Recommended tire width: 2.5 - 2.8 inches
maximum tire pressure: 1.6 bar (with 110 kg rider weight and tubeless body)
maximum system weight: n / a
Color / finish: black / UD matt
Weight: 420g

Area of application: Trail TR, All Mountain AM
ETRTO: 584x40
Inside width: 40 mm
Outside width: 49 mm
Rim height: 25 mm
Offset: 0.0 mm (symmetrical)
Recommended tire width: 2.8 - 3.2 inches
maximum tire pressure: 1.6 bar (with 110 kg rider weight and tubeless body)
maximum system weight: n / a
Color / finish: black / UD matt
Weight: 457g

Intended use: Cross Country, Trail, All Mountain, Gravel, BMX
Weight including nipple: approx. 5.95g (1 piece)

Sapim places the D-Light between the Laser and the Race. It's not quite as light as the former, but it's almost as durable as the stable Race. This makes it interesting even for BMX riders. The tapered middle section is able to absorb even high peak loads, thereby minimizing the risk of breakage. At the same time, it is stiff enough to prevent unwanted torsion during wheel building, which simplifies the process and enables durable wheels. The sum of the properties makes the Sapim D-Light a universal spoke with which there are almost no limits.

Application: Cross Country, Trail, Gravel, Road
Weight incl. nipple: approx. 5.45g (1 piece)

With the CX-Ray, Sapim has succeeded in developing an extraordinary spoke. In addition to its low weight, it has exceptional resilience and flexibility. This also results in the large range of applications. It doesn't matter whether you are a racing cyclist or a mountain biker, everyone benefits from these positive characteristics. In addition, the flattened center section ensures excellent aerodynamics. The high material quality enables the construction of stable wheels and guarantees a long service life.

Application: Cross Country, Trail, Gravel, Road
Weight incl. nipple: approx. 5.45g (1 piece)

With the CX-Ray, Sapim has succeeded in developing an extraordinary spoke. In addition to its low weight, it has exceptional resilience and flexibility. This also results in the large range of applications. It doesn't matter whether you are a racing cyclist or a mountain biker, everyone benefits from these positive characteristics. In addition, the flattened center section ensures excellent aerodynamics. The high material quality enables the construction of stable wheels and guarantees a long service life.

Application: Cross Country, Trail, Gravel, Road
Weight incl. nipple: approx. 5.5g (1 piece)

The DT Swiss Aerolite has been the first choice of many wheel builders for building high-end wheelsets for years. With its middle section flattened to 0.9 millimeters, the Aerolite cuts particularly well through the air and helps you to save some watts at high speeds. In addition, it is the lightest flat spoke in the DT-Swiss range. The spoke is first butted to a thickness of 1.5 mm in a cold forging process and then flattened in a further process. This complex process further increases the strength and gives the Aerolite its high stability and durability. Thanks to these properties, the bladed spoke can be used on racing bikes or mountain bikes and fits into all hubs with standard bores.

Area of ​​use: MTB, Gravel
Weight including nipple: approx. 5.5g (1 piece)

The DT Swiss Revolite spoke combines low weight and durability. In the course of the development process, various variants were tested extensively until the final shape and choice of raw materials were determined. The result is a cross-shaped cross-section flattened on one side, which is considered the best compromise between the above properties. In addition, a special, patented cold forging process ensures that the material is compressed and thus also increases stability. Nevertheless, the spokes can also digest harder blows, which makes them particularly suitable for use on mountain bikes.

Area of ​​use: MTB, Gravel
Weight including nipple: approx. 5.5g (1 piece)

The DT Swiss Revolite spoke combines low weight and durability. In the course of the development process, various variants were tested extensively until the final shape and choice of raw materials were determined. The result is a cross-shaped cross-section flattened on one side, which is considered the best compromise between the above properties. In addition, a special, patented cold forging process ensures that the material is compressed and thus also increases stability. Nevertheless, the spokes can also digest harder blows, which makes them particularly suitable for use on mountain bikes.