Wheelset 27.5 "TR AM EN | Newmen MTB Straightpull Center Lock hubs | DT Swiss aluminum rims
intended use : Trail TR, All Mountain AM to Enduro EN
With this wheelset you can really let it rip even in difficult terrain. The indestructible Newmen hubs and the sturdy DT Swiss rims also forgive a driving error. The balanced selection of components guarantees you a high level of reliability and a long service life.
Hubs
The Newmen FADE hubs will also find many fans again. Here, too, you do not need to worry about setting the axial bearing play. The durable, double-sealed industrial bearings are precisely and stress-free already pressed in at the factory. A high degree of user-friendliness was gained through this further development. You can spend the saved time better on your favorite trail.
The construction of the freewheel is completely different from the previous model. The goal was a low noise level. The result was the FADE pawl system. 3 pawls engage in a new type of tooth profile. To increase durability, the diameter was increased and the individual pawls were made short and wide. This means that the forces generated are distributed over a larger area.
Despite the relatively low weight, security was not compromised. It is better to use a little more material at critical points, like. For example, at the transition between the brake disc and spoke mount, as risking a defect.
rims
DT Swiss has stood for innovative products of the highest quality for years. Starting as a manufacturer of high-quality spokes, the company continuously expanded its product range. Since 2004, the Swiss have also had rims in their range, which they are constantly improving through feedback from professional cyclists and taking into account new developments in materials and manufacturing. Today DT Swiss rims are among the most driven on the market.
Thanks to extensive FEM analyzes, the aluminum rims only contain as much material as is absolutely necessary. They are connected by the SBWT® welding process. The rim is stabilized with a block during welding and then CNC machined to guarantee a seamless transition.
Wheel construction at R2-Bike
Our wheels are completely assembled by hand by our wheel builders. During the entire construction process, it is important that not only the concentricity is correct, but also that the spoke tension is as even as possible. The special care allows us to give a lifelong guarantee against broken spokes, as long as this was not caused by force!
You will also receive the following services for our balance bikes:
A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths to be able to repair the wheel at short notice even after an accident.
A free initial inspection of the impeller, during which the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge the material!
Technical specifications:
intended use : Trail TR, All Mountain AM to Enduro EN
Impeller size: 27.5 "(ETRTO: 584x 30)
Rim type: Clincher (wire and folding tires)
Brake type: disc brake
Brake disc mount: Center Lock
Weights:
1593g (lightest variant: Boost + Boost, XM 481, Sapim CX-Ray)
1789g (heaviest variant: Boost + Boost, EX 511, Sapim Race)
Note:
Due to manufacturing fluctuations in all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals / rim stickers.
The specified delivery time refers to the usual duration for the assembly of the wheelset and does not reflect the availability of the individual parts.
If you would like a special spoke on the rear wheel, e.g. for the Cannondale Ai rear triangle or for EVO6, please contact our service team.
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x construction certificate
2x hologram sticker