Wheelset 27.5 "| 650B Novatec Hubs | Duke Lucky Jack carbon rims | Sapim CX-Ray | XC MA
intended use of the wheelset: Cross Country / Marathon
Novatec manufactures lightweight and rugged hub with a large range of intended uses. From cross country to enduro the endurance runner provided uncomplainingly their service. In many cases, the best parts are also fitted with wheels even in the high-end segment. Novatec always uses high quality Japanese ball bearings which ensure a peaceful and lasting smooth running with the established wheels.
Novatec Superlight 3 in 1 D771SB front
Lightweight and inexpensive front hub. The hub offers, Novatec typically, by a simple appearance, high rigidity values, light weight and ease of maintenance. The excellent running properties are realized by two high-quality, double sealed ball bearings Japanese. In addition, it is available in different axle variants, anytime convertible. (Quick release, 15x100 mm thru-axle)
Novatec Superlight 4 in 1 D772SB rear
Lightweight and inexpensive rear hub with wide range of use of MTB, Cyclocross to bike with disc brakes. Four high-quality, double sealed Japanese ball bearings ensure smooth running and long life. The freewheel body is compatible with 8 to 11-speed Shimano cassette. Thanks to optionally available freewheel body for SRAM XD 11-speed cassette (XX1, X01, X1) is an optimal adjustment possible here.
In addition, it is available in different axle variants, anytime convertible (quick release, 12x142 mm thru-axle X-12, E-Thru or Maxle 142).
DUKE Lucky Jack Carbon
The Lucky Jack by DUKE is a very light and broad rim for cross country and marathon use.
Weighing 310g the weight is surprisingly low. Great value have the dimensions of the rim. With 31 mm outside and 24.8 mm inside the rim provides not only an excellent lateral stiffness, but also the tire optimum support width. Also at low air pressure, the driver (in) no spongy driving feel, as the tires can snap off bad side. Grip and comfort of the tire increase remarkably! Of course, the rim can be driven with sealing Tubeless milk.
The rims are veresehen with an asymmetrical rim profile, which requires a more uniform pitch angle of the spokes. This optimization of the spoke angle brings a number of advantages. The spoke tension on both sides can be better matched to one another, what is the shelf life of the spokes and the entire impeller conducive. The normally directional lateral stiffness is also adjusted so that the wheel appear rigid in itself.intended use: Cross Country, Marathon
recommended weight limit including clothing. 85 Kg (28/28 Hole) 95 Kg (32/32 Hole)
Sapim CX-Ray spokes are called spokes. The middle part is butted during production to 1.5 mm in diameter and forged flat in the last step. These processes ensure a strengthening of the structure and bring forth extremely durable spokes.
Wheel building at R2-Bike
Our wheels are assembled by our farmers impeller entirely by hand. While the entire structure is considered important that not only the concentricity true, but also that the spoke tension is as uniform as possible. The special care allows us to give a lifetime guarantee against spoke breakage as long as this was not caused by force!
Furthermore, you get to our impellers following services:
- A universal wheel bag for all standard sizes.
- An extra spoke nipples + to be able to repair the wheel shortly in all required spoke lengths even after accidents.
- A free initial inspection of the impeller, with the resulting work is completely free! There are only shipping.
- A Crash Replacement promise. If you have a wheel damage due to force majeure, we build your wheel on once again. We provide 100% discount on all labor costs and only charge the material!
Wheel size inch: 27.5 "| 650B
Wheel Size ETRTO: 584 mm
Material: 3K Carbon
Wheels Type: Clincher (folding and clincher)
Internal width rim: 24.8 mm
Spokes Color: black
1368g (Novatec Superlight front + rear Superlight, Lucky Jack, 32/32)
1442g (Novatec Superlight QR15 front + Superlight 12x142 mm rear, XD, Lucky Jack, 32/32)
Note: Due to production tolerances for all components, are deviations
possible the weight. The details are usually without rim tape, valve and
Decals / Wheel Sticker determined.
Delivery: 1x complete wheelset, assembled (hub, rim, spokes and nipples)
4x spare spokes including nipple
1x construction certificate
2x hologram stickers