Wheelset 27.5 "| 650B Industry Nine hubs | NoTubes ZTR rims MK3 | Sapim CX-Ray | XC MA
intended use of the wheelset: Cross Country / Marathon
The Industry available in 11 colors available Nine Torch hubs are a real gem on every bike. Robust and full of innovations let biking, not only audible, be a completely new experience.
Industry Nine Torch Classic MTB front
With its externally sealed 2-fold bearing and an oversized axle the Torch hubs are well protected against environmental influences and extremely robust. Thus, they are ideally suited for the all mountain and enduro use. In order to transmit the braking power optimally to the impeller, has the transition between the 6-hole disc flange and the hub body a particularly large diameter. Angled spoke flanges help the forces on the sensitive spoke heads to reduce and thus prevent fractures spoke before. The classic hub flanges are available with 28 or 32 spoke holes.
Available in 5x100 mm quick release, 15x100 mm thru-axle and 15x110 mm BOOST standard.
Industry Nine Torch Classic MTB front
With its externally sealed 4-fold bearing and an oversized axle the Torch hubs are well protected against environmental influences and extremely robust. Thus, they are ideally suited for the all mountain and enduro use. However, the highlight of the rear hub of the ratchet freewheel with 120 clicks per wheel revolution. Thus, for a backlash of only 3 degrees to the adhesion results occurs when accelerating. Made possible by a 60 tooth freewheel body snap into the built-up of the 6 ratchets each 3 simultaneously. Especially in technical passages or in hard sprints brings the extremely rapid adhesion distinct advantages. And the narrow spacing leads to a unique soundscape in the impeller.
In order to transmit the braking power optimally to the impeller, has the transition between the 6-hole disc flange and the hub body a particularly large diameter. Angled spoke flanges help the forces on the sensitive spoke heads to reduce and thus prevent fractures spoke before. The classic hub flanges are available with 28 or 32 spoke holes. Available are the hubs with Sram XD or SRAM / Shimano Standard freewheel running body.
Available in 9x135 mm quick release, 12x142 mm thru-axle and 12x148 mm BOOST standard.
The rims of Notubes are probably the most commonly installed when a spitzenklassiger wheelset is requested with lightweight aluminum rim. The rim profile is optimized such that this wheel takes out a proper stiffness from very little material. In addition, the rim Tubeless ready! This means that normal tires can be driven without tube. For this, the rim must only me provided Tubelesstape and the tires are mounted with some sealing milk. By omitting the tube the friction between tire and inner tube and the flexing of the tube is completely eliminated. As a result, the rolling resistance is reduced while simultaneously increasing comfort and grip!
NoTubes ZTR Crest MK3
intended use: Cross Country, Marathon
recommended weight limit incl Clothing: 75 Kg. (28/28 Hole) 85 Kg (32/32 Hole)
NoTubes Arch MK3 The ZTR Arch MK3 was developed with the input of the Enduro World Series teams. Despite an increase by 5 millimeters tremendous inner width compared to Arch EX, the Americans were even able to reduce the weight of the MK3 minimal and at the same time increase the stiffness. By enlarged to 26 millimeters inside width of the tire increases in volume and is located at low air pressure stable on the rim. After Notubes Wide Right system the width of the Arch has been optimized for MK3 2:25 inch to 2.5 inch tires. Compared to the ZTR Crest Arch EX heavier drivers provides more stiffness and reserves in borderline situations.
intended use: Cross Country Marathon
recommended weight limit including clothing. 95 Kg (32/32 Hole)
Sapim CX-Ray spokes are called spokes. The middle part is butted during production to 1.5 mm in diameter and forged flat in the last step. These processes ensure a strengthening of the structure and bring forth extremely durable spokes.
Wheel building at R2-Bike
Our wheels are assembled by our farmers impeller entirely by hand. While the entire structure is considered important that not only the concentricity true, but also that the spoke tension is as uniform as possible. The special care allows us to give a lifetime guarantee against spoke breakage as long as this was not caused by force!
Furthermore, you get to our impellers following services:
- A universal wheel bag for all standard sizes.
- An extra spoke nipples + to be able to repair the wheel shortly in all required spoke lengths even after accidents.
- A free initial inspection of the impeller, with the resulting work is completely free! There are only shipping.
- A Crash Replacement promise. If you have a wheel damage due to force majeure, we build your wheel on once again. We provide 100% discount on all labor costs and only charge the material!
Wheel size inch: 27.5 "| 650B
Wheel Size ETRTO: 584 mm
Wheels Type: Clincher (folding and clincher)
Internal width rim: 23 mm (Crest), 26 mm (Arch)
Spokes Color: black
1413g (Industry Nine Torch Classic front + rear Torch Classic, ZTR Crest MK3, 28/28)
1453g (Industry Nine Torch Classic front + rear Torch Classic, ZTR Crest MK3, 32/32)
1599g (Industry Nine Torch Classic front + rear Torch Classic, ZTR Arch MK3, 32/32)
Note: Due to production tolerances for all components, are deviations
possible the weight. The details are usually without rim tape, valve and
Decals / Wheel Sticker determined.
Delivery: 1x complete wheelset, assembled (hub, rim, spokes and nipples)
4x spare spokes including nipple
1x construction certificate
2x hologram stickers