Wheelset 27.5 "| 650B Industry Nine hubs | NoTubes ZTR Flow rims MK3 | Sapim CX-Ray | EN FR
intended use of the wheelset: Enduro / Freeride
The Industry available in 11 colors available Nine Torch hubs are a real gem on every bike. Robust and full of innovations let biking, not only audible, be a completely new experience.
Industry Nine Torch Classic MTB front
With its externally sealed 2-fold bearing and an oversized axle the Torch hubs are well protected against environmental influences and extremely robust. Thus, they are ideally suited for the all mountain and enduro use. In order to transmit the braking power optimally to the impeller, has the transition between the 6-hole disc flange and the hub body a particularly large diameter. Angled spoke flanges help the forces on the sensitive spoke heads to reduce and thus prevent fractures spoke before. The classic hub flanges are available with 28 or 32 spoke holes.
Available in 5x100 mm quick release, 15x100 mm thru-axle and 15x110 mm BOOST standard.
Industry Nine Torch Classic MTB front
With its externally sealed 4-fold bearing and an oversized axle the Torch hubs are well protected against environmental influences and extremely robust. Thus, they are ideally suited for the all mountain and enduro use. However, the highlight of the rear hub of the ratchet freewheel with 120 clicks per wheel revolution. Thus, for a backlash of only 3 degrees to the adhesion results occurs when accelerating. Made possible by a 60 tooth freewheel body snap into the built-up of the 6 ratchets each 3 simultaneously. Especially in technical passages or in hard sprints brings the extremely rapid adhesion distinct advantages. And the narrow spacing leads to a unique soundscape in the impeller.
In order to transmit the braking power optimally to the impeller, has the transition between the 6-hole disc flange and the hub body a particularly large diameter. Angled spoke flanges help the forces on the sensitive spoke heads to reduce and thus prevent fractures spoke before. The classic hub flanges are available with 28 or 32 spoke holes. Available are the hubs with Sram XD or SRAM / Shimano Standard freewheel running body.
Available in 9x135 mm quick release, 12x142 mm thru-axle and 12x148 mm BOOST standard.
NoTubes Flow MK3
Wide, durable, lightweight - these are the features of the new edition of Notubes Flows Downhill rim with 29 millimeters inside width of the tire increases in volume and is located at low air pressure stable on the rim.. After Notubes Wide Right system the width of the flow MK3 is optimal for 2:35 inch to 2.8 inch tires. A new aluminum alloy in combination with the new rim design makes the rim stiffer and keeps the weight of 480 grams is extremely low. For previous version remained the same over the years is the refined Bead Socket Technology and the superior characteristics Tubeless. An extra light rim, the tire can develop fully and the tire volume increases compared to a conventional rim. This leads to a lower rolling resistance and better damping characteristics.
intended use: Enduro, Freeride
recommended weight limit including clothing. 100 Kg (32/32 Hole)
Sapim CX-Ray spokes are called spokes. The middle part is butted during production to 1.5 mm in diameter and forged flat in the last step. These processes ensure a strengthening of the structure and bring forth extremely durable spokes.
Wheel building at R2-Bike
Our wheels are assembled by our farmers impeller entirely by hand. While the entire structure is considered important that not only the concentricity true, but also that the spoke tension is as uniform as possible. The special care allows us to give a lifetime guarantee against spoke breakage as long as this was not caused by force!
Furthermore, you get to our impellers following services:
- A universal wheel bag for all standard sizes.
- An extra spoke nipples + to be able to repair the wheel shortly in all required spoke lengths even after accidents.
- A free initial inspection of the impeller, with the resulting work is completely free! There are only shipping.
- A Crash Replacement promise. If you have a wheel damage due to force majeure, we build your wheel on once again. We provide 100% discount on all labor costs and only charge the material!
Wheel size inch: 27.5 "| 650B
Wheel Size ETRTO: 584 mm
Wheels Type: Clincher (folding and clincher)
Internal width rim: 29.0 mm (Flow)
Spokes Color: black
1717g (Industry Nine Torch Classic front + rear Torch Classic, ZTR Flow MK3, 32/32)
Note: Due to production tolerances for all components, are deviations
possible the weight. The details are usually without rim tape, valve and
Decals / Wheel Sticker determined.
Delivery: 1x complete wheelset, assembled (hub, rim, spokes and nipples)
4x spare spokes including nipple
1x construction certificate
2x hologram stickers