header image

    Wheelset 27,5" | 650B DT Swiss Hubs | NoTubes ZTR Flow MK3 Rims | Sapim CX-Ray | EN FR

    Item no.:
    21098

    Product weight:1588g
    Manufacturer:
    r2-bike
    from 587,50 € UVP: 748,60 €
    including 19% VAT. , no shipping costs (Sperrgut)
    • ca. 1 - 2 weeks

    Configure

      including 19% VAT., no shipping costs (Sperrgut)

    DT Swiss Hub Disc | Axle front *

    DT Swiss Hub Disc | Axle Rear*

    NoTubes Rim Enduro | Freeride*

    Colour Aluminium Nipples*

    Rim Tape | Tubeless Kit*

    Spoking Option Rear Wheel*

    * Pflichtfeld

    Article details

    • Description

    • Notify me when this product is available

    Wheelset 27.5 "| 650B DT Swiss hubs | NoTubes ZTR Flow rims MK3 | Sapim CX-Ray | EN FR

    intended use of the wheelset: Enduro / Freeride


    hub

    Hubs DT Swiss enjoy to be virtually indestructible reputation. And not without reason. Thanks to high quality bearings made of stainless steel and effective seals DT Swiss hubs are actually significantly more resistant than most competitors in the market.


    hub front

    DT Swiss 350 front

    The entry into the world of DT Swiss hubs. The 350 hubs are designed to be extremely user-friendly, so no play must be set and the maintenance intervals are needed, if at all, only at long intervals. If, after tens of thousands of kilometers it out a service be necessary, the hubs can be thanks to the DT Swiss plug system dismantled and serviced within minutes without special tools. The years-proven flange geometry forms the perfect basis for durable and rigid wheels.

    Available with 5x100 mm quick release, 15x100 mm thru-axle, 15x110 mm BOOST Standard and 20x110 mm thru-axle. Furthermore, there is a choice of 6-hole (IS2000) and Centerlock disc mount.


    DT Swiss 240S front

    The 240S hubs are the perennial favorites in the DT Swiss program. Yet lightweight robust and durable form in the long period the core of a rigid wheel. Unlike the 350s hubs easy rolling stainless steel bearings are installed here. The hub body is also more weight-reduced, but not at the expense of durability.

    Available with 5x100 mm quick release, 15x100 mm thru-axle and 20x110 mm thru-axle. Furthermore, there is a choice of 6-hole (IS2000) and Centerlock disc mount.


    DT Swiss 240S Lefty

    Also for the exotic Lefty provides DT Swiss on a version of the 240s hub. Perfect for riders looking for a lightweight DT Swiss hub for their bike with Lefty fork.

    Compatible with all Lefty Lefty and hybrid, for Lefty 2.0 and Lefty SuperMax is an optional adapter for the brake mounting required.


    DT Swiss 180 Carbon Ceramic front

    The high-end hub in DT Swiss program. Although it is lightweight, it does not shy away even the toughest intended uses. Equipped with Ceramic bearings and through the use of carbon, this hub is not only extremely light but also durable. So has thus ideal conditions for a very lightweight and sturdy wheel.

    Available with 5x100 mm quick release or 15x100 mm thru-axle and the proven Centerlock disc mount.


    rear hub

    DT Swiss 350 rear

    The tried-and-toothed with 18 teeth toothed disc freewheel is the hallmark of DT Swiss rear hub, extremely reliable and can stand comparison to Swiss movement hardly shy. The bearing technology with 2 bearings for freewheel and hub body is adapted to the loads that occur. For a long life sealing system ensures the labyrinth together with grinding discs and executed sealing bearing rings made of steel. If, after tens of thousands of kilometers it out a service be necessary, the hubs can be thanks to the DT Swiss plug system dismantled and serviced within minutes without special tools.

    Available with 5x135 mm quick release, 12x142 mm thru-axle, 12x148 mm BOOST Standard and Shimano 9/10/11-speed SRAM or XD 11-speed freewheel. Furthermore, there is a choice of 6-hole (IS2000) and Centerlock disc mount.


    DT Swiss 240S rear

    The 240S hubs are the perennial favorites in the DT Swiss program. Yet lightweight robust and durable form in the long period the core of a rigid wheel. Unlike the 350s hubs easy rolling stainless steel bearings are installed here. The hub body is also more weight-reduced, but not at the expense of durability. The 240 is of course also equipped with the legendary toothed disc freewheel.

    Available with 5x135 mm quick release, 12x142 mm thru-axle and Shimano 9/10/11-speed SRAM or XD 11-speed freewheel. Furthermore, there is a choice of 6-hole (IS2000) and Centerlock disc mount.


    DT Swiss 180 Carbon Ceramic rear

    Following the motto never change a running system DT Swiss has its high-end only slightly revised hub of 180 series. Same is the minimalist weight with extremely high stiffness, which is achieved by a central part of unidirectional carbon on the hub body. The stiffness at the hub body is used, the load on the spokes evenly distribute. Driving and braking forces are transmitted better from both Speichenflanschen on all spokes. Unilateral load peaks are prevented what hub, spokes and rim saves.
    DT Swiss hubs stand for easiest installation and highest reliability. The latter is achieved with the 180 hub with smooth, durable hybrid ceramic bearings and the indestructible ratchet drive mechanism. With 18 detents per revolution this not only ensures a very direct load path, but also for the typical, robust sound of DT Swiss hubs.

    Available with 5x135 mm quick release, 12x142 mm thru-axle, and Shimano 9/10/11-speed SRAM or XD 11-speed freewheel and the proven Centerlock disc mount.


    rims

    NoTubes Flow MK3

    Wide, durable, lightweight - these are the features of the new edition of Notubes Flows Downhill rim with 29 millimeters inside width of the tire increases in volume and is located at low air pressure stable on the rim.. After Notubes Wide Right system the width of the flow MK3 is optimal for 2:35 inch to 2.8 inch tires. A new aluminum alloy in combination with the new rim design makes the rim stiffer and keeps the weight of 480 grams is extremely low. For previous version remained the same over the years is the refined Bead Socket Technology and the superior characteristics Tubeless. An extra light rim, the tire can develop fully and the tire volume increases compared to a conventional rim. This leads to a lower rolling resistance and better damping characteristics.

    intended use: Enduro, Freeride
    recommended weight limit including clothing. 100 Kg (32/32 Hole)


    spokes

    Sapim CX-Ray

    Sapim CX-Ray spokes are called spokes. The middle part is butted during production to 1.5 mm in diameter and forged flat in the last step. These processes ensure a strengthening of the structure and bring forth extremely durable spokes.


    Wheel building at R2-Bike

    Our wheels are assembled by our farmers impeller entirely by hand. While the entire structure is considered important that not only the concentricity true, but also that the spoke tension is as uniform as possible. The special care allows us to give a lifetime guarantee against spoke breakage as long as this was not caused by force!

    Furthermore, you get to our impellers following services:

    • A universal wheel bag for all standard sizes.
    • An extra spoke nipples + to be able to repair the wheel shortly in all required spoke lengths even after accidents.
    • A free initial inspection of the impeller, with the resulting work is completely free! There are only shipping.
    • A Crash Replacement promise. If you have a wheel damage due to force majeure, we build your wheel on once again. We provide 100% discount on all labor costs and only charge the material!


    Technical specifications:

    Wheel size inch: 27.5 "| 650B
    Wheel Size ETRTO: 584 mm
    Wheels Type: Clincher (folding and clincher)
    Internal width rim: 29.0 mm (Flow)
    Spokes Color: black

    weights:


    1600g (DT Swiss 180 CC | QR 5x100 mm + DT Swiss 180 CC | QR 5x135 mm, ZTR Flow MK3, 32/32)
    1588g (DT Swiss 180 CC | QR 15 + DT Swiss 180 CC | 12x142 mm, ZTR Flow MK3, 32/32)
    1662g (DT Swiss 240S | QR 5x100 mm + DT Swiss 240S | QR 5x135 mm, ZTR Flow MK3, 32/32)
    1695g (DT Swiss 240S | QR 15 + DT Swiss 240S | 12x142 mm, ZTR Flow MK3, 32/32)
    1654g (DT Swiss 240S | Lefty + DT Swiss 240S | QR 5x135 mm, ZTR Flow MK3, 32/32)
    1765g (DT Swiss 350 | QR 5x100 mm + DT Swiss 350 | QR 5x135 mm, ZTR Flow MK3, 32/32)
    1702g (DT Swiss 350 | BOOST + DT Swiss 350 | 12x148 mm BOOST, ZTR Flow MK3, 32/32)


    Note: Due to production tolerances for all components, are deviations
    possible the weight. The details are usually without rim tape, valve and
    Decals / Wheel Sticker determined.


    Delivery: 1x complete wheelset, assembled (hub, rim, spokes and nipples)
    1x Laufradtasche
    4x spare spokes including nipple
    1x construction certificate
    2x hologram stickers


    quick start Guide

    DT 350

    DT 240S

    DT 180 CC

    DE / EN

    DE / EN

    DE / EN


    Product weight:1588g

    Request notification

    * Mandatory fields

    Top