Wheelset 27.5 "| 650B Chris King hubs | Easton ARC 24 Rims | Sapim CX-Ray | XC MA
intended use of the wheelset: Cross Country / Marathon
Chris King hub attached to a certain myth. You are almost unchanged for years on the market and not the scrap heap. Thanks resistant technology, development and unmistakable appearance, they have developed a cult object. The precisely machined and anodized in bright colors surfaces are designed for typical Chris King in extremely high quality. The multiple sealed bearings, which are manufactured by Chris King in Portland, Oregon itself, contribute enormously to increase the lifetime.
A highlight is the 5-year warranty. This shows the confidence of Chris King in its products.
Chris King MTB ISO Disc front SD
The ISO disc hub an enlarged diameter and a one-piece aluminum axle, making them significantly stiffer. The result is a higher steering precision, since the hub driving hardly deformed even under high stress.
The front hub in the Small Diameter (SD) version can be converted at any time to the corresponding axle on quick release or 15mm Steckachsstandard.
Chris King MTB Disc ISO LD front
When - Large Diameter - Version larger and thus more stable bearing can now be used by increasing the hub body and the axle. On the extremely rigid, one-piece aluminum axle specially sit large, perfectly sealed bearings.
The front hub in the Large Diameter (LD) version can be converted at any time to the corresponding axle to 15 mm, 20 mm or even 24 mm Steckachsstandard.
Chris King MTB ISO Lefty Disc LD front
These hubs are finally also for the lovers of the Lefty fork Cannondale. The highlight, a retooling of the front hub to other Achsstandards any time. So the beloved hub can be used in virtually any wheel.
The Lefty hub in the Large Diameter (LD) version can be converted at any time to the corresponding axle to 15 mm, 20 mm or even 24 mm Steckachsstandard.
Compatible with all Lefty Lefty and hybrid, for Lefty 2.0 and Lefty SuperMax is an optional adapter for the brake mounting required.
Chris King MTB ISO Lefty SuperMax disc front
Chris King hubs are to finally have for lovers of Lefty SuperMax fork Cannondale. As with the - Large Diameter - version can be used by increasing the size of the hub body and the axle now even larger and thus more stable bearing.
Compatible only with Lefty 2.0 and Lefty forks SuperMax.
Chris King MTB ISO Disc rear
Chris King describes the freewheeling sound of his boss with "Angry Bee Sound", the sound of an angry bee. The 72 teeth of the toothed disc freewheel cause freewheel the low hum and give the boss as their characteristic sound. The extremely fine gradation of the freewheel eliminates the free travel of the pedal and brings a little more control over the wheel. Particularly in technically demanding and blocked intended use, this plays a role.
This Chris King rear hub can with the corresponding axle at any time on quick release or the 10 x 135 mm thru bolt | TA10, 12 X 135 mm TA, 12 x 142 mm X-12 | E-Thru | Maxle142 mm Steckachsstandards be retrofitted.
The new ARC rim from Easton was developed around the current tires trends to be mr. She comes into the inner widths 24-, 27- or 30 mm and is therefore suitable for many tire volume. intended uses range from XC to aggressively modified all-mountain.
Easton ARC 24
A specially shaped rim with a central recess and minimalist, short hook on the rim holding the tire in any situation on the rim, even at low air pressures.
Running tires on a wide rim reduces the risk of coming off the tire, buckling in curves is inhibited and increases the breakdown protection. Due to the larger contact surface of the tire, the grip is significantly improved.
The rim is made of forged aluminum and is welded to the durability to increase and reduce weight. The black anodized finish saves weight and adds the rim with their vinyl decals a discreet appearance.
intended use: Cross Country, Marathon
recommended weight limit including clothing. 100 Kg (32/32 Hole)
Sapim CX-Ray spokes are called spokes. The middle part is butted during production to 1.5 mm in diameter and forged flat in the last step. These processes ensure a strengthening of the structure and bring forth extremely durable spokes.
Wheel building at R2-Bike
Our wheels are assembled by our farmers impeller entirely by hand. While the entire structure is considered important that not only the concentricity true, but also that the spoke tension is as uniform as possible. The special care allows us to give a lifetime guarantee against spoke breakage as long as this was not caused by force!
Furthermore, you get to our impellers following services:
- A universal wheel bag for all standard sizes.
- An extra spoke nipples + to be able to repair the wheel shortly in all required spoke lengths even after accidents.
- A free initial inspection of the impeller, with the resulting work is completely free! There are only shipping.
- A Crash Replacement promise. If you have a wheel damage due to force majeure, we build your wheel on once again. We provide 100% discount on all labor costs and only charge the material!
Wheel size inch: 27.5 "| 650B
Wheel Size ETRTO: 584 mm
Wheels Type: Clincher (folding and clincher)
Internal width rim: 24 mm (Easton ARC 24)
Spokes Color: black
1630g (Chris King MTB ISO Disc SD front + ISO Disc rear SD, Easton ARC 24, 32/32)
1701g (Chris King MTB Disc ISO LD front + ISO Disc rear SD, Easton ARC 24, 32/32)
1699g (Chris King MTB ISO Lefty Disc LD front + ISO Disc rear SD, Easton ARC 24, 32/32)
1710g (Chris King MTB ISO Lefty SuperMax Disc LD front + ISO Disc rear SD, Easton ARC 24, 32/32)
Note: Due to production tolerances for all components, are deviations
possible the weight. The details are usually without rim tape, valve and
Decals / Wheel Sticker determined.
Delivery: 1x complete wheelset, assembled (hub, rim, spokes and nipples)
4x spare spokes including nipple
1x construction certificate
2x hologram stickers
quick start Guide
ISO Disc Manual
ISO Hub Specs