Wheelset 26 "Tune King + Kong Hubs with NoTubes Arch MK3 Rims Sapim CX Ray Spokes
Tune Hub King + Kong
The hubs were very early in the Tune range and became the hobby horse of the company over the years. The construction of the hubs is based on the principles of lightweight construction and is therefore kept simple. Extravagant extras, which would only bring unnecessary weight with you, there is only in the color selection. The ZTR Arch MK3 was developed with the input of the Enduro World Series teams. In spite of a huge 5 millimeters enlarged inner area compared to Arch EX, the Americans could even reduce the weight of the MK3 to a minimum and at the same time increase the stiffness. This is made possible by the new rim construction inspired by the Notubes carbon rims. Due to the inner width, which is increased to 26 millimeters, the tire gains volume and sits more firmly on the rim at low air pressure. According to the Notubes Wide-Right system, the width of the Arch MK3 has been optimized for 2.25 inch to 2.5 inch tires. The Bead Socket Technology, which has been refined over the years, and its superior tubeless properties, has remained the same as the previous version. Thanks to an extra low rim flange, the tire can fully unfold and the tire volume increases compared to a conventional rim. This leads to a lower rolling resistance and better damping behavior.
The hubs are mounted on 17 mm axle n via sealed industrial bearings. The special construction of the tune is also easy with strong quick-tensioners! There is no tensioning of the bearings due to excessive clamping forces with these hubs!
NoTubes Arch MK3
Sapim CX-Ray spokes are so-called knife spokes. The middle section is confined to 1.5 mm diameter during production and flat forged in the last working step. These processes provide a solidification of the structure and produce extremely durable spokes.
Wheel construction at R2-Bike
Our impellers are assembled completely by hand from our impeller builders. During the whole construction, it is important that not only the concentricity is correct, but also that the storage voltage is as uniform as possible. The special care allows us to give a life-long guarantee against spike breakage, as long as this has not been caused by the influence!
Furthermore, you will get the following services:
- A universal impeller bag for all common sizes.
- A spare spoke + nipple in all required spoke lengths to repair the impeller at short notice even after accidents.
- A free first check of the impeller, during which resulting work is completely free! Only shipping costs are charged.
- A crash replacement promise. If your impeller is damaged due to force majeure, we rebuild your impeller once. We grant 100% discount on all labor costs and only charge the material!
Wheel Size Inches: 26 "
Wheel size ETRTO: 559 mm
intended use : Cross Country to All Mountain
Weight restriction: cross country up to 100kg All Mountain up to 85kg
Internal width rim: 21 mm
Weight: approx. 1420g
Note: Due to production fluctuations in all components, variations in weight are possible. The details are usually determined without rim tape, valves and decals / rim stickers.