header image

    Wheelset 26" Hope Pro 4 Evo 40T | NoTubes ZTR Arch MK3 | 1.600g

    Item no.:

    Product weight:1600g
    577,50 € UVP: 676,59 €
    You save 14,65 %, that is 99,09 €
    including 19% VAT. , no shipping costs (Sperrgut)
    • ca. 1 - 2 weeks
    Color Hubs
    Color Nipples
    Axle Standard Frontwheel
    Axle Standard Rear Wheel
    Freehub Body

    Article details

    • Description

    • Notify me when this product is available

    Wheelset 26 "Hope Pro 4 Evo 40T Hubs with NoTubes Arch MK3 rims and Sapim CX Ray spokes

    Hope Pro 4 Evo 40T

    Barnoldswick in England is the home of every Hope product and the weather there is the test stone for these hubs. The ball bearings used are sealed and are made of stainless steel to withstand the English rainstorm with the associated muddy trails. All Hope hubs are made directly from Hope. All parts CNC machined from an alloying of the forged blanks and subsequently polished and anodized. The polish in the interplay with the anodize gives rise to Hope's typical, radiant colors.

    NoTubes Arch MK3

    The ZTR Arch MK3 was developed with the input of the Enduro World Series teams. In spite of a huge 5 millimeters enlarged inner area compared to Arch EX, the Americans could even reduce the weight of the MK3 to a minimum and at the same time increase the stiffness. This is made possible by the new rim construction inspired by the Notubes carbon rims. Due to the inner width, which is increased to 26 millimeters, the tire gains volume and sits more firmly on the rim at low air pressure. According to the Notubes Wide-Right system, the width of the Arch MK3 has been optimized for 2.25 inch to 2.5 inch tires. The Bead Socket Technology, which has been refined over the years, and its superior tubeless properties, has remained the same as the previous version. Thanks to an extra low rim flange, the tire can fully unfold and the tire volume increases compared to a conventional rim. This leads to a lower rolling resistance and better damping behavior.


    Sapim CX-Ray

    Sapim CX-Ray spokes are so-called knife spokes. The middle section is confined to 1.5 mm diameter during production and flat forged in the last working step. These processes provide a solidification of the structure and produce extremely durable spokes.

    Wheel construction at R2-Bike

    Our impellers are assembled completely by hand from our impeller builders. During the whole construction, it is important that not only the concentricity is correct, but also that the storage voltage is as uniform as possible. The special care allows us to give a life-long guarantee against spike breakage, as long as this has not been caused by the influence!

    Furthermore, you will get the following services:

    • A universal impeller bag for all common sizes.
    • A spare spoke + nipple in all required spoke lengths to repair the impeller at short notice even after accidents.
    • A free first check of the impeller, during which resulting work is completely free! Only shipping costs are charged.
    • A crash replacement promise. If your impeller is damaged due to force majeure, we rebuild your impeller once. We grant 100% discount on all labor costs and only charge the material!

    Technical specifications:

    Wheel Size Inches: 26 "
    Wheel size ETRTO: 559 mm
    intended use : Cross Country to All Mountain
    Weight restriction: cross country up to 100kg All Mountain up to 85kg
    Internal width rim: 21 mm

    Weight: approx. 1600g

    Note: Due to production fluctuations in all components, variations in weight are possible. The details are usually determined without rim tape, valves and decals / rim stickers.

    Product weight:1600g

    Request notification

    * Mandatory fields

    Other customers have also bought the following items