WOLFTOOTH chainring stainless steel Direct Mount for SRAM GXP | BB30 crank with long shaft
More and more, the current focus in mountain biking is moving away from the "gram bites" to "fun, functionality and durability". Second embodies this DirectMount chain specially developed for SRAM. Made of heat-treated 416 stainless steel in Wolftooth typical processing at the highest level. Nice detail is the five in-built threads for the installation of the separately available Wolftooth Bashring's.
Steel considerably increases the service life of a chainring.
Replaces the Sram chainring and the spider. The 3 mounting screws of the old spider are used to attach the new chainring to the crank.
Due to the unique wide / narrow design of the teeth of a Wolftooth chain blade, these grip particularly well into the chain and prevent the jumping of the chain in a 1x9, 1x10 or 1x11 in conjunction with an SRAM Type-2 or Shimano Shadow + derailleur Setup is effective. The chainrings work best with a 10-speed or 11-speed chain.
ATTENTION: compatible with Sram / Truvativ GXP and BB30 cranks . BB30 cranks are only compatible when the model with longer axle is concerned. These are recognizable by the installed 16 mm spacer on the drive side.
intended use : MTB
Material: 416 stainless steel
Technology: Narrow Wide
bolt circle diameter : -
Mounting: Direct Mount
Number of teeth: 24, 26, 28 or 30 teeth
Compatibility cranks : SRAM / Truvativ GXP or BB30 crank with long shaft and
SRAM Road / CX1 cranks with detachable spider
Compatibility chain: 9x, 10x, 11x or 12-speed (SRAM Eagle)
chain line : 49 mm | Depending on crank used
Offset: standard, GXP 6 mm
Adjustment possibilities: none
24 teeth - 106g
26 teeth - 123g
28 teeth - 137g
30 teeth - 155g
Scope of supply: 1x Wolftooth steel chainring 1x sticker
Note: The illustrated Bashring (including screws) is for illustrative purposes and is NOT included in the scope of supply.
Special price: 30,00 €