WOLFTOOTH chainring LK130 38 teeth
Cyclocross chainring for standard crankshafts with 5-hole 130 mm hole bolt circle diameter , for the conversion to a single setup.
All Wolftooth chainrings are equipped with extra-formed drop-stop teeth and are made from 7075 aluminum.
Due to the unique wide / narrow design of the teeth of a Wolftooth chain blade, these grip particularly well into the chain and thus prevent the jumping off of the chain in a 1x9, 1x10 or 1x11 setup effectively. The chainrings work best with a 10-speed or 11x chain.
1-way chainrings with wide / narrow teeth run in very muddy conditions, danger of not being able to prevent chain chains and a jumping off of the chain. In such conditions, additional chain guide should be used.
bolt circle diameter : 130 mm
Number of teeth: 38
Weight: 44 g
Scope of delivery: 1x WOLFTOOTH chainring LK130 38 teeth
Note: Do not fit the Shimano DA 9000 / Ultegra 6800 and Campagnolo CX10 / 11 cranks
Important : When using this 38 Z. chainring, the chain can be touched easily with the spider. To counteract this, the spider must be chamfered on the inside. This processing is at your own risk.