WOLFTOOTH Chainring 1-fold Drop-Stop LK 110 for Shimano Dura Ace 9000 | Ultegra 6800 crank
Cyclocross, Gravel and road bike optimized chainring for the asymmetric 110 mm Shimano racing wheel bolt circle diameter . The chainring is available with 36 to 44 teeth. All Wolftooth chainrings are equipped with specially formed drop-stop teeth and are made of 7075 aluminum. For fixing simply use the screws included with the original crank.
For mounting Wolftooth recommends the in-house 6 millimeter chainring bolts, which you can find in our shop . When using a R9100 or R8000 crank, these are mandatory.
Thanks to the unique wide / narrow design of the teeth of a Wolftooth chainring, they grip the chain particularly well and effectively prevent it from jumping off. The chainrings work best with a 10-speed , 11-speed or 12-speed chain together.
When used in very muddy conditions, Wolftooth recommends a chain guide or a chain catcher in addition to a damped rear derailleur (Shimano Shadow +, SRAM Type 2.0 / 3.0) to prevent chainsucking or chaindrops.
With a small modification, the chainring also fits the Dura Ace R9100 and Ultegra R8000 crank. Please note the PDF below!
Material: 7075 aluminum
bolt circle diameter : 110 mm (asymmetrical for Shimano)
Crank compatibility: Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703 and Tiagra 4700
Drive compatibility: for 1x9 (only with 10-speed chain), 1x10, 1x11 or 1x12 drives (SRAM Eagle)
Compatibility Chains: 10-speed , 11-speed or 12-speed chain
Number of teeth: 36, 38, 40, 42, 44, 46, 48 or 50
chain line : 44 mm
Color: black anodized
36 teeth - not specified
38 teeth - 66g
40 teeth - 74g
42 teeth - 81g
44 teeth - 90g
46 teeth - not specified
48 teeth - not specified
50 teeth - 112g
Scope of supply : 1x WOLFTOOTH chainring 1-fold Drop-Stop LK 110 for Shimano Dura Ace 9000 | Ultegra 6800 crank
Note: The chainring is only compatible with the asymmetric 110 mm Shimano bolt circle diameter !
R8000 and R9100 Modification Guide